Field Selectable Amber
Lens Strobe
The System Sensor SpectrAlert® Advance SW-ALERT
and SWH-ALERT amber lens strobes provide the
distinctive visual signal used for mass notification
during non-fire evacuations.
Features
The System Sensor SpectrAlert Advance SW-ALERT and
SWH-ALERT strobes are designed with an amber colored lens
mounted in a white housing to allow visual signaling for mass
notification in compliance with ANSI/UL1638 – Standard for General
Signaling Visible Appliances.
•ꢀElectrically compatible with existing SpectrAlert products
•ꢀAutomatic selection of 12- or 24-volt operation at 15 and 15/75
candela
•ꢀPlug-in design
The SW-ALERT and SWH-ALERT amber lens strobes provide simple
installation and instant compatibility with SpectrAlert Advance
synchronized systems. Their features include plug-in design and 11
field selectable candela settings.
•ꢀAmber lens strobe
•ꢀWhite plastic housing with ALERT clearly visible in red letters
•ꢀField selectable candela settings of 15, 15/75, 30, 75, 95, 110, 115,
135, 150, 177, 185 (please refer to Table 2 for equivalent candela
ratings for UL1971 )
These strobes are indoor products that attach to universal mounting
plates connected to a four-inch square, four-inch octagon, single-
gang, or double-gang junction boxes. The circuit is wired to the
SEMS terminals on the mounting plate. The device will rotate into
position, locking the product’s pins into the mounting plate’s
terminals. The device will temporarily hold in place with a catch until
it is secured with a captured mounting screw.
•ꢀRated for 32°F to 120°F (0°C to 49°C)
•ꢀHousing can be mounted to either wall or ceiling
•ꢀShorting spring on mounting plate for continuity check before
installation
•ꢀTamper resistant construction with Torx head mounting screw
•ꢀDesign allows minimal intrusion into the back box
•ꢀCompatible with System Sensor synchronization protocol
Agency Listings
S4011, S5512, S3593