STM32F469xx
Arm®Cortex®-M4 32b MCU+FPU, 225DMIPS, up to 2MB Flash/384+4KB RAM, USB OTG HS/FS,
Ethernet, FMC, dual Quad-SPI, Graphical accelerator, Camera IF, LCD-TFT & MIPI DSI
Datasheet - production data
Features
•
Includes ST state-of-the-art patented technology
®
®
• Core: Arm 32-bit Cortex -M4 CPU with FPU,
LQFP100 (14 × 14 mm)
LQFP144 (20 × 20 mm)
LQFP176 (24 × 24 mm)
UFBGA169 (7 × 7 mm)
UFBGA176 (10 x 10 mm)
TFBGA216 (13 x 13 mm)
adaptive real-time accelerator (ART
WLCSP168
Accelerator™) allowing 0-wait state execution
from flash memory, frequency up to 180 MHz,
MPU, 225 DMIPS/1.25 DMIPS/MHz
(Dhrystone 2.1), and DSP instructions
Memories
LQFP208 (28 × 28 mm)
•
Debug mode
– SWD and JTAG interfaces
– Cortex -M4 Trace Macrocell™
Up to 161 I/O ports with interrupt capability
– Up to 157 fast I/Os up to 90 MHz
– Up to 159 5 V-tolerant I/Os
®
•
–
–
512 bytes of OTP memory
Up to 2 MB of flash memory organized into two
banks allowing read-while-write
•
•
–
–
Up to 384+4 KB of SRAM including 64 KB of
CCM (core coupled memory) data RAM
Flexible external memory controller with up to
32-bit data bus: SRAM, PSRAM,
SDRAM/LPSDR, SDRAM, flash NOR/NAND
memories
Up to 21 communication interfaces
– Up to three I C interfaces (SMBus/PMBus)
2
– Up to four USARTs and four UARTs
(11.25 Mbit/s, ISO7816 interface, LIN, IrDA,
modem control)
– Up to six SPIs (45 Mbits/s), two with muxed
–
Dual-flash mode Quad-SPI interface
2
full-duplex I S for audio class accuracy via
•
•
Graphics
internal audio PLL or external clock
– 1x SAI (serial audio interface)
– 2× CAN (2.0B Active)
– Chrom-ART Accelerator™ (DMA2D),
graphical hardware accelerator enabling
enhanced graphical user interface with
minimum CPU load
– SDIO interface
•
•
Advanced connectivity
– LCD parallel interface, 8080/6800 modes
– LCD TFT controller supporting up to XGA
resolution
– USB 2.0 full-speed device/host/OTG
controller with on-chip PHY
®
– USB 2.0 high-speed/full-speed
device/host/OTG controller with dedicated
DMA, on-chip full-speed PHY and ULPI
– Dedicated USB power rail enabling on-chip
PHYs operation throughout the entire MCU
power supply range
– MIPI DSI host controller supporting up to
720p 30 Hz resolution
Clock, reset, and supply management
– 1.7 V to 3.6 V application supply and I/Os
– POR, PDR, PVD, and BOR
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
(1% accuracy)
– 10/100 Ethernet MAC with dedicated DMA:
supports IEEE 1588v2 hardware, MII/RMII
8- to 14-bit parallel camera interface up to
54 Mbytes/s.
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
Low power
•
•
•
•
True random number generator
CRC calculation unit
RTC: subsecond accuracy, hardware calendar
•
•
– Sleep, Stop, and Standby modes
– V
supply for RTC, 20×32 bit backup
BAT
registers + optional 4 KB backup SRAM
3× 12-bit, 2.4 MSPS ADC: up to 24 channels and
7.2 MSPS in triple interleaved mode
2× 12-bit D/A converters
96-bit unique ID
Table 1. Device summary
Reference
Part numbers
•
•
STM32F469AE, STM32F469AG, STM32F469AI
STM32F469BE, STM32F469BG, STM32F469BI
STM32F469IE, STM32F469IG, STM32F469II
STM32F469NE, STM32F469NG, STM32F469NI
STM32F469VE, STM32469VG, STM32469VI
STM32F469ZE, STM32469ZG, STM32469ZI
General-purpose DMA: 16-stream DMA
controller with FIFOs and burst support
Up to 17 timers: up to twelve 16-bit and two
32-bit timers up to 180 MHz, each with up to four
IC/OC/PWM or pulse counter and quadrature
(incremental) encoder input. 2x watchdogs and
SysTick timer
STM32F469xx
•
November 2023
DS11189 Rev 8
1/225
This is information on a product in full production.
www.st.com