STM32F411xC STM32F411xE
®
®
ARM Cortex -M4 32b MCU+FPU, 125 DMIPS, 512KB Flash,
128KB RAM, USB OTG FS, 11 TIMs, 1 ADC, 13 comm. interfaces
Datasheet - production data
Features
)%*$
• Dynamic Efficiency Line with BAM (Batch
Acquisition Mode)
– 1.7 V to 3.6 V power supply
WLCSP49
(2.999x3.185 mm)
– - 40°C to 85/105/125 °C temperature range
LQFP100
(14 × 14mm)
LQFP64
UFQFPN48
(7 × 7 mm)
UFBGA100
(7 × 7 mm)
®
®
• Core: ARM 32-bit Cortex -M4 CPU with
FPU, Adaptive real-time accelerator (ART
Accelerator™) allowing 0-wait state execution
from Flash memory, frequency up to 100 MHz,
memory protection unit,
(10x10 mm)
• Debug mode
– Serial wire debug (SWD) & JTAG
interfaces
125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1),
and DSP instructions
®
– Cortex -M4 Embedded Trace Macrocell™
• Up to 81 I/O ports with interrupt capability
– Up to 78 fast I/Os up to 100 MHz
– Up to 77 5 V-tolerant I/Os
• Memories
– Up to 512 Kbytes of Flash memory
– 128 Kbytes of SRAM
• Up to 13 communication interfaces
• Clock, reset and supply management
– 1.7 V to 3.6 V application supply and I/Os
– POR, PDR, PVD and BOR
2
– Up to 3 x I C interfaces (SMBus/PMBus)
– Up to 3 USARTs (2 x 12.5 Mbit/s,
1 x 6.25 Mbit/s), ISO 7816 interface, LIN,
IrDA, modem control)
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
– Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or
I2S audio protocol), SPI2 and SPI3 with
2
muxed full-duplex I S to achieve audio
class accuracy via internal audio PLL or
external clock
– SDIO interface (SD/MMC/eMMC)
– Advanced connectivity: USB 2.0 full-speed
device/host/OTG controller with on-chip
PHY
• Power consumption
– Run: 100 µA/MHz (peripheral off)
– Stop (Flash in Stop mode, fast wakeup
time): 42 µA Typ @ 25C; 65 µA max
@25 °C
– Stop (Flash in Deep power down mode,
slow wakeup time): down to 9 µA @ 25 °C;
28 µA max @25 °C
• CRC calculation unit
• 96-bit unique ID
– Standby: 1.8 µA @25 °C / 1.7 V without
RTC; 11 µA @85 °C @1.7 V
• RTC: subsecond accuracy, hardware calendar
• All packages (WLCSP49, LQFP64/100,
– V
supply for RTC: 1 µA @25 °C
®
BAT
UFQFPN48, UFBGA100) are ECOPACK 2
• 1×12-bit, 2.4 MSPS A/D converter: up to 16
channels
Table 1. Device summary
• General-purpose DMA: 16-stream DMA
Reference
Part number
controllers with FIFOs and burst support
STM32F411CC, STM32F411RC,
STM32F411VC
• Up to 11 timers: up to six 16-bit, two 32-bit
timers up to 100 MHz, each with up to four
IC/OC/PWM or pulse counter and quadrature
(incremental) encoder input, two watchdog
timers (independent and window) and a
SysTick timer
STM32F411xC
STM32F411CE, STM32F411RE,
STM32F411VE
STM32F411xE
December 2016
DocID026289 Rev 6
1/149
This is information on a product in full production.
www.st.com