MSX-Lite
Photovolta ic Mod ule s
®
MSX-Lite™ modules, part of Solarex’s Megamodule™
series, are designed for applications requiring a combina-
tion of light weight, compactness, and ruggedness. They
are particularly useful as 12VDC power sources for expe-
ditions, mobile communications, recreational vehicles
and railroad signaling devices.
• Proven cell interconnection technique and
moisture-resistant metallization ensure electrical
integrity in severe climates.
Light, Rugged, Easily Mounted
Although extremely rugged, MSX-Lite modules are
compact and lightweight. The largest, the MSX-30 Lite,
weighs only 6 1/2 pounds (3 kg). The modules may be
mounted from front or back through four grommet-
finished holes which accept fasteners up to 0.2" (5mm)
diameter. Total module thickness is only 16 mm, includ-
ing the mounting grommets and the low-profile output
termination box. The termination box is on the mod-
ule’s front, facilitating mounting on flat surfaces.
MSX-Lite modules can also be mounted on curved
surfaces: they will conform to curvature up to 1
inch per foot.
Four models of MSX-Lite are available, the MSX-5 Lite,
MSX-10 Lite, MSX-20 Lite and the MSX-30 Lite, delivering
typical peak power of 4.5, 10, 20, and 30 watts respec-
tively at Standard Test Conditions (STC). They are intend-
ed primarily for use in single-module power systems, but
may be interconnected—up to a 30V nominal limit—to
provide increased voltage or current.
Ample Charging Voltage
With 36 cells in series, MSX-Lite modules generate
sufficient voltage to charge 12V batteries in virtually
any climate, as shown by the electrical characteris-
tics on the reverse of this sheet.
Solarex Quality
MSX-Lite modules are tested and inspected in our ISO
9001-certified factories to demanding specifications.
Variables Affecting Performance
The performance of typical MSX-Lite™ modules is
described by the I-V (current/voltage) curves and electri-
cal characteristics table on the reverse side. Each mod-
ule’s actual, tested output characteristics are printed
on its label.
Individually Tested, Labeled
and Warranted
As part of the final inspection procedure, every MSX-Lite
module is tested in a solar simulator and labeled with its
actual output—voltage, current, and power at maximum
Options
power point (P )—at Standard Test Conditions and
max
MSX-Lite modules may be ordered with an integral block-
ing diode, which prevents battery discharge at night or
during periods of poor insolation.
Standard Operating Conditions. Furthermore, Solarex
guarantees:
• that no module will generate less than its guaranteed
minimum P
when purchased;
max
• at least 90% of the guaranteed minimum P
five years.
for
More than 20 years ago, Solarex made the first polycrys-
talline silicon solar cell, advancing photovoltaics beyond the
first-generation monocrystalline technology developed for
electronics. Developed specifically for
photovoltaics, polycrystalline silicon is
used in Solarex's Mega™ series to
max
Contact Solarex's Marketing Department for full terms
and limitations of this warranty.
Proven Materials and Construction
The materials used in these modules reflect Solarex’ two
decades of experience with solar modules and systems
installed in virtually every climate on Earth.
provide a wide range of attractive,
efficient modules. They require
• Polycrystalline silicon solar cells: efficient,
attractive, stable.
substantially less energy to
manufacture and generate
• Modules are rugged and weatherproof: cell strings are
laminated between sheets of ethylene vinyl acetate
(EVA) with a stainless steel substrate and Tedlar™ cover.
substantially more energy per rated
watt than other crystalline silicon modules.
630 Solarex Court, Frederick, MD 21703 USA • PHONE (301) 698-4200 • FAX (301) 698-4201 • www.solarex.com • info@solarex.com
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
