SST ATA-Disk Chip
SST58SD008 / 016 / 024 / 032 / 048 / 064
SST58LD008 / 016 / 024 / 032 / 048 / 064
PreliminarySpecifications
FEATURES:
1
•
•
ZeroPowerDataRetention
– Batteries not required for data storage
•
ATA/IDEstandardinterface
– 512 Bytes per sector
– ATA command set compatible
– Support Data Transfer Speed up to PIO Mode-3
Start Up Time
2
– Sleep to read: 200 ns (typical)
– Sleep to write: 200 ns (typical)
– Power-on to Ready: 200 ms (typical),
500 ms (maximum)
•
•
•
8, 16, 24, 32, 48 and 64 MByte capacities
Standard 600mil 32pin DIP package
Single Voltage Read and Write Operation
– 5.0 Volt-only for SST58SDxxx
– 3.3 Volt-only for SST58LDxxx
3
•
•
Support for Both Commercial and Industrial
TemperatureRange
– 0°C to 70°C for Operating Commercial
– -40 °C to +85 °C for Operating Industrial
– -50 °C to +100 °C for non-Operating (storage)
4
•
•
•
Supports 5.0-Volt or 3.3-Volt Read and Write
– 5V + 10% or 3.3V + 5% for Commercial
– 5V + 5% or 3.3V + 5% for Industrial
5
Extremely Rugged and Reliable
– Built-in ECC support corrects 3 Bytes
of error per 512 Byte sector
– Endurance: 1,000,000 cycles (typical)
– Greaterthan1,000,000hoursMTBF
LowPowerConsumption:
– Active mode: 30mA/50mA (3.3V/5.0V) (typical)
– Sleepmode: 200µA/600µA(3.3V/5.0V)(maximum)
6
DataTransferRateto/fromHost
– 20 MB/s burst at 5.0 V
– 6.6 MB/s burst at 3.3 V
•
•
IntelligentATA/IDEController
– Built-inmicrocontrollerwithintelligentfirmware
– Built-in Flash File System
7
•
•
SustainedWritePerformance
– Up to 1.4MB/sec (host to flash)
PowerManagementUnit
– Immediate disabling of unused circuitry
8
ControllerOverheadCommandtoDRQ
– Less than 0.5 ms
9
ProductDescription
10
11
12
13
14
15
16
SST’s ATA-Disk Chip (ADC) is a low cost, high perfor-
mance, embedded flash memory data storage system.
This product is well suited for solid state mass storage
applications offering new and expanded functionality
while enabling cost effective designs.
The ADC is a solid state disk drive that is designed to
replace conventional IDE hard disk drive and uses
standard ATA/IDE protocol. It has built in
microcontroller and file management firmware that
communicateswithATAstandardinterfaces;therefore,
the ADC does not require additional or proprietary
software such as Flash File System (FFS) and Memory
Technology Driver (MTD) software.
ATA-based solid state mass storage technology is
widely used in such products as portable and desktop
computers, digital cameras, music players, handheld
datacollectionscanners,cellularphones,PCSphones,
PDAs, handy terminals, personal communicators, ad-
vanced two-way pagers, audio recorders, monitoring
devices, and set-top boxes.
The ADC is designed to work at either 5V±10% or 3.3V
±5%. Thepinassignmentisdesignedtomatchexisting
IDE signaltraces on the motherboard. It uses standard
ATA driver that is part of all major OS such as Windows
95/98/2000/NT/CE, MAC, UNIX, etc.
ADC provides complete IDE Hard Disk Drive function-
ality and compatibility. ADC is a perfect solution to
consumer electronic products requiring smaller, but
more reliable and cost effective data storage. The ADC
is read and written using a single power supply of 5.0-
Voltsor3.3-Voltsandisavailablein8,16,24,32,48and
64 MByte capacities.
The ADC is packaged in the standard 600 mil. 32-pin
DIPpackageforeasyandcosteffectivemountingtothe
system motherboard.
©2000 SiliconStorageTechnology,Inc.
391-2 8/00
TheSSTlogoandSuperFlashareregisteredtrademarksofSiliconStorageTechnology,Inc.ATA-DiskChipis
atrademarkofSiliconStorageTechnology,Inc.Thesespecificationsaresubjecttochangewithoutnotice.
1
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
