AE
REVISION AE
NOTES:
SQW-1XX-01-XXX-D-VS-XX-XXX
No OF POSITIONS
-02 THRU -50
C
1.
REPRESENTS A CRITICAL DIMENSION.
POLARIZATION OPTION
2. POSITIONS -04 THRU -50 ARE TO BE TUBED.
DO NOT
SCALE FROM
THIS PRINT
-XXX: INDICATES POSITION POLARIZED
3. POSITIONS 02 & 03 ARE TO BE LAYERED PACKAGED.
4. MAXIMUM CUT FLASH: .010[.25].
(PER ROW)
(USE PK-07-N, SEE FIG 2, SHT 2)
OPTION
5. STAKED ALIGNMENT PIN USED AT SAMTECS DISCRETION.
6. MEASURE THE HEIGHT FROM THE EDGE, NOT THE BREAK OFF.
7. MEASURED AT BEND RADIUS, NOT END OF PIN.
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
LEAD STYLE
-01
-A: STAKED & MOLDED IN ALIGNMENT PIN
(5 POS MIN) (USE SM-A8H, SEE FIG 3, SHT 2)
-LC: LOCKING CLIP (5 POS MIN)
PLATING SPECIFICATION
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
AE
(USE LC-07-TM, SEE FIG 4, SHT 2 & NOTE 8)
-P: PICK & PLACE PAD (4 POS MIN)
MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
AE
(USE LMP-03, SEE FIG 6, SHT 2)
-TR: TAPE & REEL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
(AVAILABLE POS 4 THRU 28)
-K: POLYAMIDE FILM PAD (4 POS MIN)
(USE K-500-300, SEE FIG 7, SHT 2)
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA
TIN/LEAD (93/7+/-5%) TAIL
(.005 [.13] THICKNESS WITH SILICONE ADHESIVE)
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
TAIL STYLE
-VS: VERTICAL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
ROW SPECIFICATION
-D: DOUBLE (USE SQW-XX-D)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
C
((No OF POS x .07874 [2.000]) + .0117 [.297]) .010 [.25]
(No OF POS x .07874 [2.000]) - .07874 [2.000] REF
02
.157 4.00
REF
.07874 2.0000
REF
C
.0900 2.286
01
2
MAX SWAY
IN-PROCESS
(EITHER DIRECTION)
SQW-XX-D
.059 1.50
REF
.203 5.16
REF
+4°
-0°
.250 6.35
REF
90°
.0500 1.270
(SEE NOTE 7)
C
.015 0.38
REF
.006[.15]
2
MAX SWAY
.015 0.37 REF
(EITHER DIRECTION)
.0197 0.500 REF (TYP)
C-97-01-XXX
.034 0.87 REF
.187 4.75 REF
FIG 1
SQW-110-01-XXX-D-VS SHOWN
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
DECIMALS
ANGLES
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
2MM SOCKETS TRIP ASSEMBLY
DWG. NO.
SQW-1XX-01-XXX-D-VS-XX-XXX
BY:
DEAN P
04/22/1997 SHEET 1 OF 3
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW