CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
series
Endurance: +105°C 2,000 hours
Low ESR
PZ
Recommended Applications: System Board,Display Card,Small Charger and intelligent TV
RoHS Compliant and lead-free
SPECIFICATIONS
Items
Characteristics
Category Temperature Range
Rated Working Voltage Range
Nominal Capacitance Range
-55~+105°C
6.3~100 Vdc
4.7~5600µF
±20%(M)
Capacitance Tolerance
DC Leakage Current
(at 20°C,120Hz)
I≤0.2CV or 500μA, whichever is greater.
Where, I:Max.leakage current (µA),C:Nominal capacitance (µF),V: Rated voltage (V)
(at 20°C after 2 minutes)
100
6.3 6.8
0.08
7.5
10
16
25
35
50
63
Rated Voltage(Vdc)
tanδ (max.)
Dissipation Factor (tanδ)
ESR(100kHz,20°C)
0.12
0.15
(at 20°C,120Hz)
Value in characteristics table
Z(+105°C)/Z(+20°C)≤1.25
Z(-55°C)/Z(+20°C)≤1.25
Temperature Characteristic
(Impedance Ratio at 100kHz)
After applying rated voltage for 2,000 hours at 105°C,the capacitors shall meet the following requirements.
Appearance
Capacitance Change
D.F. (tanδ)
No significant damage
Endurance
≤±20% of the initial value
≤150% of the initial specified value
≤150% of the initial specified value
≤The initial specified value
ESR
Leakage Current
After subjecting to 90%~95% RH for 2,000 hours at 60°C without voltage applied, the capacitors shall meet the specified
values for the Endurance characteristics listed above.
Humidity Test
After subjecting to 1,000 cycles each consisting of charge with the surge voltage specified at normal temperature for 30
seconds through a protective resistor and discharge for 5 minutes 30 seconds, the capacitors shall meet the following
requirements.
Appearance
No significant damage
Capacitance Change
D.F. (tanδ)
≤±20% of the initial value
≤150% of the initial specified value
Surge Test
ESR
≤150% of the initial specified value
≤The initial specified value
Leakage Current
DIMENSIONS[mm]
ØD
Ød
5
5.5
0.5
2.5
6.3
8
10
0.6
5.0
Ød
0.5
2.0
0.5
2.5
0.6
3.5
ØD'
F
ØD'
L'
F±0.5
ØD-0.1~+0.5
L'
15min.
4min.
L+1.0max.
L-0.5~+1
PART NUMBERING SYSTEM
S
P
Z
1
C
M
2
7
1
E
0
8
O
0
0
R
A
X X X
Special code
Marking code
Terminal code
Size code
Capacitance code
Capacitance tolerance code
Voltage code
Series code
Category code
23