150W Single Output with PFC Function
SPV-150 series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Fixed switching frequency at 100KHz
Output voltage programmable from 20~110% by 1~5.5VDC external
control signal
3 years warranty
SPECIFICATION
MODEL
SPV-150-12
SPV-150-24
SPV-150-48
DC VOLTAGE
12V
24V
48V
RATED CURRENT
CURRENT RANGE
RATED POWER
12.5A
0 ~ 12.5A
150W
6.25A
3.125A
0 ~ 3.125A
150W
0 ~ 6.25A
150W
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3 1.0%
150mVp-p
240mVp-p
41 ~ 52.8V
1.0%
OUTPUT
10 ~ 13.2V
20 ~ 26.4V
1.0%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
0.3%
0.2%
0.5%
0.2%
0.5%
0.5%
800ms, 50ms/230VAC
2500ms, 50ms/115VAC at full load
16ms/230VAC
Note.5 88 ~ 264VAC
47 ~ 63Hz
16ms/115VAC at full load
124 ~ 370VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
PF>0.94/230VAC
82%
PF>0.98/115VAC at full load
83%
INPUT
83%
2.5A/115VAC
1.25A/230VAC
40A/230VAC
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
20A/115VAC
<1mA / 240VAC
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
57.6 ~ 67.2V
OVERLOAD
13.8 ~ 16.2V
Protection type : Shut down o/p voltage, re-power on to recover
80 (TSW1 : detect on heatsink of power transistor)
27.6 ~ 32.4V
PROTECTION OVER VOLTAGE
5
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
4 ~ 10VDC power off, <0 ~ 0.8VDC power on
REMOTE CONTROL
OUTPUT VOLTAGE TRIM
WORKING TEMP.
FUNCTION
9.6 ~ 52.8V
2.4 ~ 13.2V
4.8 ~ 26.4V
-20 ~ +65 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
ENVIRONMENT
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
SAFETY
EMC
(Note 4)
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
207K hrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
PACKING
215*115*50mm (L*W*H)
1.1Kg; 12pcs/14Kg/0.92CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Mean Well reserves the right to adjust this spec when deemed appropriate.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SPV-150-SPEC 2009-09-21