Ordering number : ENN6349
SPS-450 Series
SPS-450 Series
Receiver Pre-amp Module for
Infrared Remote Control
Features
• This is an unified module consisting of a PIN photodiode and receiver pre-amp IC.
It is a compact type, not necessary to mount outer part, and provides low voltage and low power consumption.
• It also puts a measure to inverter fluorescent lamp with a high frequency trap circuit for band-pass filter.
• It has leads at the both sides, so it is easy to put it on PCB.
Absolute Maximum Ratings at Ta=25°C (as per JIS C 7032)
Parameter
Symbol
Rating
0 to +6.3
100
Unit
V
Line Voltage
V
CC
Power Dissipation
P
D
mW
°C
Operating Temperature
Storage Temperature
Soldering Temperature
Topr
Tstg
Tsol
--10 to +60
--20 to +70
°C
1
+260 *
°C
Recommended Operating Condition at Ta=25°C
Parameter Symbol
Opr. Condition
Unit
Line Voltage
V
CC
+4.7 to +5.3
V
We recommend the signal format with leader code (for example ; NEC format or Home Electrical Appliances Society
format in Japan) for the remote control transmitter.
Electrical / Optical Characteristics at Ta=25°C, V =5.0V D.C.
CC
Parameter
Symbol
Condition
Non-signal input
Min.
--
Typ.
1.4
Max.
2.2
--
Unit
mA
m
Consumption Current
ICC
2
* On axis
7.5
10.0
2
* form device
Cone with its limit
Controlling Distance
L
inclined at 30 deg to axis
Cone with its limit
5.0
--
--
m
inclined at 40 deg to axis
3.0
--
--
--
--
--
0 . 5
--
m
V
V
2
Low-level Output Voltage
High-level Output Voltage
VL
VH
*
*
At the point of 30cm on axis
At the point of 30cm on axis
2
2
4.5
* Specified by TWL time
interval of output at the
point of 30cm and 7.5m on axis
Low-level Pulse Width
TWL
TWH
300
610
590
900
µs
2
* Specified by TWH time
High-level Pulse Width
Carrier Wave Frequency
interval of output at the
300
--
900
--
µs
point of 30cm and 7.5m on axis
3
f
--
*
kHz
o
1
*
Soldering time : with in 3sec and clearance of 1mm from lead stopper.
2
3
*
As shown in Fig.1, burst wave shall be transmitted by our transmitter in item 7. Detector face illuminance : Ee < 10 lx
Carrier wave frequency (fo) differs every a type. Refer to the following list.
*
SANYO Electric Co.,Ltd. Sem iconductor Com pany
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
(
)
D2099 GI, MI No.6349 1/5