General Purpose
Wirewound Resistors
Welwyn Components
SPP Series
0R1 to 2K4 ohms
•
•
•
•
Positive high TC’s upon request
Weldable and solderable magnetic leads
Lower ranges available - contact factory
Electrical Data
Type
SPP-1
±R1 - 1Kꢀ*
SPP-2
±R1 - ꢀK4
5, 1±
SPP-3
±R1 - ꢀK4
5, 1±
Resistance range
Standard Tolerance
ohms
±ꢁ
5, 1±
1 @ 85°C
ꢀ @ 85°C
1 @ 14±°C
-
3 @ 85°C
ꢀ @ 145°C
1 @ 19±°C
-
±075 @ 1±5°C
±05 @ 1ꢀ5°C
Derating to ± @ 16±°C
1 @ 85°C ± 1±ꢁ
Power Rating
watts
watts
-
Load Life Stability
ꢀ @ 85°C ± 1±ꢁ
√PR
3 @ 85°C ± 1±ꢁ
Max0 Continuous Working Voltage
Min0 Insulation Resistance - Dry
Min0 Insulation Resistance - Wet
Min0 Dielectric Withstanding Voltage
Current Noise
1±,±±± megohm
1±± megohm
6±± volts RMS
Negligible
Approx0 ꢀ±±°C
Temperature Rise at Rated Load, ꢀ5°C Ambient
Approx0 15±°C
Approx0 ꢀꢀ5°C
Note: Unless specified otherwise standard test centres are 13/4 inches0
Physical Data
Dimensions (inches)
A
max.
Type
A max
±04±±
±057±
±057±
B max
±0148
±017±
±017±
C±±0±±ꢀ
±0±3ꢀ
B
SPP-1
SPP-2
SPP-3
C
±0±3ꢀ
1.125 min
±0±3ꢀ
Fuse/Pulse Applications
SPP resistors normally fuse in less than one minute with five
to ten times rated wattage depending on the range0 By
modifying the windings, using a different wire size or type,
they can be made to fuse much faster0
On the other hand, by using larger wire diameters and higher
melt temperature alloys they can handle from five to fifty
times overloads of film resistors depending on the range0
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability0
All information is subject to Welwyn’s own data and is considered accurate at time of going to print0
A subsidiary of
TT electronics plc
© Welwyn Components Limited · Bedlington, Northumberland NEꢀꢀ 7AA, UK
Telephone: +44 (±) 167± 8ꢀꢀ181 · Facsimile: +44 (±) 167± 8ꢀ9465 · Email: info@welwyn-tt0com · Website: www0welwyn-tt0com
Issue B · ±30±ꢀ
97