PASSIVE DELAY LINES, TAPPED, SIP PACKAGE
RESISTORSꢀCAPACITORSꢀCOILSꢀDELAY LINES
Term.W is
RoHS
compliant
SP05 SERIES - 7 PIN, 5 TAP
RoHS
SP10 SERIES - 14 PIN, 10 TAP
RCD’s SP05 and SP10 passive delay line series are a lumped
constant design per applicable portions of MIL-D-23859. The units
incorporate high performance inductors and multi-layer capacitors,
ensuring stable transmission, low temperature coefficient, and
excellent environmental performance in space-saving SIP design.
ꢀ Low cost, prompt delivery!
ꢀ Wide variety of values, 5nS to 750nS
ꢀ Fast rise times
ꢀ Detailed application handbook available
Total Delay Tolerance
Tap Delay Tolerance
Temperature Coefficient
Insulation Resistance
Dielectric Strength
±5% or ±0.5nS (whichever is greater)
±5% or ±0.5nS (whichever is greater)
100ppm/°C Max.
OPTIONS
ꢀ Custom circuits available
1000MΩ min.
100VDC
±10% Max.
ꢀ Non-standard delay times & impedance values
ꢀ Tighter tolerance or temperature coefficient
ꢀ Faster rise times
ꢀ MIL-D-23859 screening
ꢀ Increased operating temperature range
Distortion
Operating Temp. Range
Operating Freq. (BW)
Attenuation: (dependent on
impedance, low values have 5-8% @100Ω, 5-10% @200Ω, 5-15% @300Ω,
lower attenuation)
7-20% @ 500Ω
0 to70°C (Opt.39= -40 to 85°C, ER= -55 to125°C)
BW (MHz)=.35/(TR nS x 1000)
SP05= 2-5%, SP10=2.5-4% @50Ω,
TYPE SP10 (Available 10nS to 750nS)
TYPE SP05 (Available 5nS to 100nS)
.215
[5.46]
.200
[5.08]
Max.
1.465 [37.2] Max.
→
←
→
↑
←
← .800 [20.3] Max.→
.03
[.77]
↓
↑
.375
.015
[.38]
↓
.250
[9.53]
Max.
[6.35]
Max.
1
2
3
4
5
6
7
8
9 10 11 12 13 14
1
2
3
4
5
6
7
↓
↓
↑
↓
.100
[2.54]
Min.
↑
↓
.100
[2.54]
Min.
→ ←
.024 [.6]
→ ←
.024 [.6]
.100
→
←
[2.54]
→
← .100
1.3 [33.0]
[2.54]
.600 [15.2]
←
→
3
4
5
6
4
5
6
7
8
9
10 11 12
(IN) 2
7 (OUT)
1 (GND)
(IN) 3
13 (OUT)
14 (GND)
(GND) 1
(GND) 1
TYPE SP10, 14 PIN 10 TAPS
TYPE SP05, 7 PIN 5 TAPS
Total
Delay, T
(nS)
Max. Rise
Delay
per TAP
(nS)
Available
Impedance
Values (±10%)
Total
Delay, T
(nS)
Max. Rise
Delay
per TAP
(nS)
Available
Impedance
Values (±10%)
D
Time, T
(nS)
R
D
Time, T
(nS)
R
10
20
30
40
50
3
1.0 ± .5
2.0 ± .75
3.0 ± 1
4.0 ± 2
5.0 ± 2
6.0 ± 2
7.5 ± 2
10 ± 2
12 ± 2
15 ± 2
20 ± 2
25 ± 2
100Ω
50Ω, 100Ω, 200Ω
50Ω, 100Ω, 200Ω
5.5
6.5
8
5
2.0
3.3
6.0
7.8
9.0
1.0 ± .3
2.0 ± .4
4.0 ± .6
5.0 ± 1
6.0 ± 1
50Ω, 100Ω
50Ω, 100Ω
50Ω, 100Ω
50Ω, 100Ω
50Ω, 100Ω
10
20
25
30
50Ω, 100Ω, 200Ω, 300Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
50Ω, 100Ω, 200Ω, 300Ω, 500Ω
100Ω, 200Ω, 300Ω, 500Ω 100Ω,
200Ω, 300Ω, 500Ω
10
12
15
20
24
30
40
50
60
100
120
150
60
75
100
120
150
200
250
300
500
600
750
40
50
60
70
75
12
15
18
22
23
8 ± 1.5
10 ± 1.8
12 ± 2
14 ± 2
15 ± 3
50Ω, 100Ω
50Ω, 100Ω
50Ω
50Ω
50Ω
30 ± 2
50 ± 2.5
60 ± 3
80
90
100
24
27
28
16 ± 3
18 ± 3
20 ± 3
50Ω
50Ω
50Ω
300Ω, 500Ω
300Ω, 500Ω
75 ± 3.75
P/N DESIGNATION:
TEST CONDITIONS @25°C
SP10
- 10NS - 101 B W
RCD Type
Options: as assigned by RCD
(leave blank if std.)
Total Delay
Impedance in 3 digit code: 50R=50Ω,
101=100Ω, 201=200Ω, 301=300Ω, 501=500Ω,
Packaging: B=Bulk
1.) Input test pulse shall have a pulse amplitude of 2.5
volts, rise time of 2nS, and pulse width of 5X total delay.
2.) Delay line to be terminated to within 1% of its charac
teristic impedance.
3.) Delay time measured from 50% of input pulse to 50%
of output pulse on leading edge with no loads on output.
4.) Rise time measured from 10% to 90% of output pulse.
Termination: W= Lead-free, Q= Tin/Lead (leave blank
if either is acceptable)
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA106 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
112