SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
features common to all types
additional features of the SN55116/SN75116
D
D
D
D
D
D
Single 5-V Supply
D
D
D
Choice of Ceramic or Plastic Packages
Independent Driver and Receiver
3-State Driver Output Circuitry
TTL-Compatible Driver Inputs
TTL-Compatible Receiver Output
Differential Line Operation
Choice of Open-Collector or Totem-Pole
Outputs on Both Driver and Receiver
D
Dual Data Inputs on Driver
D
Optional Line-Termination Resistor in
Receiver
Receiver Output Strobe (SN55116,
SN75116, SN75117) or Enable (SN75118,
SN75119)
D
D
15-V Receiver Common-Mode Capability
Receiver Frequency-Response Control
D
Designed for Party-Line (Data-Bus)
Applications
additional features of the SN75117
D
Driver Output Internally Connected to
Receiver Input
The SN75118 is an SN75116 With 3-State Receiver Output Circuitry
The SN75119 is an SN75117 With 3-State Receiver Output Circuitry
description
These integrated circuits are designed for use in interfacing between TTL-type digital systems and differential
data-transmission lines. They are especially useful for party-line (data-bus) applications. Each of these circuit
types combine in one package a 3-state differential line driver and a differential-input line receiver, both of which
operate from a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The
driver employed is similar to the SN55113 and SN75113 3-state line drivers, and the receiver is similar to the
SN55115 and SN75115 line receivers.
The SN55116, SN75116, and SN75118 offer all the features of the SN55113 and SN75113 drivers and the
SN55115 and SN75115 receivers combined. The driver performs the dual input AND and NAND functions when
enabled or presents a high impedance to the load when in the disabled state. The driver output stages are similar
to TTL totem-pole outputs, but have the current-sinking portion separated from the current-sourcing portion and
both are brought out to adjacent package terminals. This feature allows the user the option of using the driver
in the open-collector output configuration, or, by connecting the adjacent source and sink terminals together,
of using the driver in the normal totem-pole output configuration.
The receiver portion of the SN55116, SN75116, and SN75118 features a differential-input circuit having a
common-mode voltage range of 15 V. An internal 130-Ω equivalent resistor also is provided, which optionally
can be used to terminate the transmission line. A frequency-response control terminal allows the user to reduce
the speed of the receiver or to improve differential noise immunity. The receivers of the SN55116 and SN75116
have an output strobe and a split totem-pole output. The receiver of the SN75118 has an output-enable for the
3-state split totem-pole output. The receiver section of either circuit is independent of the driver section except
for the V and ground terminals.
CC
The SN75117 and SN75119 provide the basic driver and receiver functions of the SN55116, SN75116, and
SN75118, but use a package that is only half as large. The SN75117 and SN75119 are intended primarily for
party-line or bus-organized systems because the driver outputs are internally connected to the receiver inputs.
The driver has a single data input and a single enable input. The SN75117 receiver has an output strobe, while
the SN75119 receiver has a 3-state output enable. However, these devices do not provide output connection
options, line-termination resistors, or receiver frequency-response controls.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
