5秒后页面跳转
捷配首页

Datasheet > 驱动程序和接口 > 线路驱动器或接收器> SN75119D
SN75119D PDF预览

SN75119D

更新时间： 2024-11-01 22:53:35
品牌 Logo 应用领域
德州仪器 - TI /
页数 文件大小 规格书
15页 240K
描述
DIFFERENTIAL LINE TRANSCEIVERS

阅读下载

中文翻译

获取价格

SN75119D 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active零件包装代码：SOIC
包装说明：SOP, SOP8,.25针数：8
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01Factory Lead Time：1 week
风险等级：5.6其他特性：TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O
差分输出：YES驱动器位数：1
高电平输入电流最大值：0.00004 A输入特性：DIFFERENTIAL
接口集成电路类型：LINE TRANSCEIVER接口标准：GENERAL PURPOSE
JESD-30 代码：R-PDSO-G8JESD-609代码：e4
长度：4.9 mm湿度敏感等级：2
功能数量：1端子数量：8
最高工作温度：70 °C最低工作温度：
最小输出摆幅：2 V输出特性：3-STATE
最大输出低电流：0.015 A输出极性：COMPLEMENTARY
封装主体材料：PLASTIC/EPOXY封装代码：SOP
封装等效代码：SOP8,.25封装形状：RECTANGULAR
封装形式：SMALL OUTLINE峰值回流温度（摄氏度）：260
电源：5 V认证状态：Not Qualified
最大接收延迟：75 ns接收器位数：1
座面最大高度：1.75 mm子类别：Line Driver or Receivers
最大压摆率：60 mA最大供电电压：5.5 V
最小供电电压：4.5 V标称供电电压：5 V
电源电压1-最大：5.5 V电源电压1-分钟：4.5 V
电源电压1-Nom：5 V表面贴装：YES
技术：BIPOLAR温度等级：COMMERCIAL
端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)端子形式：GULL WING
端子节距：1.27 mm端子位置：DUAL
处于峰值回流温度下的最长时间：NOT SPECIFIED最大传输延迟：30 ns
宽度：3.9 mmBase Number Matches：1

SN75119D 数据手册

 浏览型号SN75119D的Datasheet PDF文件第2页浏览型号SN75119D的Datasheet PDF文件第3页浏览型号SN75119D的Datasheet PDF文件第4页浏览型号SN75119D的Datasheet PDF文件第5页浏览型号SN75119D的Datasheet PDF文件第6页浏览型号SN75119D的Datasheet PDF文件第7页 
SN55116, SN75116, SN75117, SN75118, SN75119  
DIFFERENTIAL LINE TRANSCEIVERS  
SLLS073D – MAY 1976 – REVISED MAY 1998  
features common to all types  
additional features of the SN55116/SN75116  
Single 5-V Supply  
Choice of Ceramic or Plastic Packages  
Independent Driver and Receiver  
3-State Driver Output Circuitry  
TTL-Compatible Driver Inputs  
TTL-Compatible Receiver Output  
Differential Line Operation  
Choice of Open-Collector or Totem-Pole  
Outputs on Both Driver and Receiver  
Dual Data Inputs on Driver  
Optional Line-Termination Resistor in  
Receiver  
Receiver Output Strobe (SN55116,  
SN75116, SN75117) or Enable (SN75118,  
SN75119)  
±15-V Receiver Common-Mode Capability  
Designed for Party-Line (Data-Bus)  
Applications  
Receiver Frequency-Response Control  
additional features of the SN75117  
Driver Output Internally Connected to  
Receiver Input  
The SN75118 is an SN75116 With 3-State Receiver Output Circuitry  
The SN75119 is an SN75117 With 3-State Receiver Output Circuitry  
description  
These integrated circuits are designed for use in interfacing between TTL-type digital systems and differential  
data-transmission lines. They are especially useful for party-line (data-bus) applications. Each of these circuit  
types combine in one package a 3-state differential line driver and a differential-input line receiver, both of which  
operate from a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The  
driver employed is similar to the SN55113 and SN75113 3-state line drivers, and the receiver is similar to the  
SN55115 and SN75115 line receivers.  
The SN55116, SN75116, and SN75118 offer all the features of the SN55113 and SN75113 drivers and the  
SN55115 and SN75115 receivers combined. The driver performs the dual input AND and NAND functions when  
enabledorpresentsahighimpedancetotheloadwheninthedisabledstate. Thedriveroutputstagesaresimilar  
to TTL totem-pole outputs, but have the current-sinking portion separated from the current-sourcing portion and  
both are brought out to adjacent package terminals. This feature allows the user the option of using the driver  
in the open-collector output configuration, or, by connecting the adjacent source and sink terminals together,  
of using the driver in the normal totem-pole output configuration.  
The receiver portion of the SN55116, SN75116, and SN75118 features a differential-input circuit having a  
common-mode voltage range of ±15 V. An internal 130-Ω equivalent resistor also is provided, which optionally  
can be used to terminate the transmission line. A frequency-response control terminal allows the user to reduce  
the speed of the receiver or to improve differential noise immunity. The receivers of the SN55116 and SN75116  
have an output strobe and a split totem-pole output. The receiver of the SN75118 has an output-enable for the  
3-state split totem-pole output. The receiver section of either circuit is independent of the driver section except  
for the V  
and ground terminals.  
CC  
The SN75117 and SN75119 provide the basic driver and receiver functions of the SN55116, SN75116, and  
SN75118, but use a package that is only half as large. The SN75117 and SN75119 are intended primarily for  
party-line or bus-organized systems because the driver outputs are internally connected to the receiver inputs.  
The driver has a single data input and a single enable input. The SN75117 receiver has an output strobe, while  
the SN75119 receiver has a 3-state output enable. However, these devices do not provide output connection  
options, line-termination resistors, or receiver frequency-response controls.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Copyright 1998, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
1234567...15

中文翻译

下载PDF

SN75119D 替代型号

型号 品牌 替代类型 描述 数据表
SN75119DR TI

功能相似

 暂无描述

与SN75119D相关器件

型号 品牌 获取价格 描述 数据表
SN75119DR TI

获取价格

 		暂无描述
SN75119JG4 TI

获取价格

 		SN75119JG4
SN75119JGP4 TI

获取价格

 		IC,LINE TRANSCEIVER,BIPOLAR,1 DRIVER,1 RCVR,DIP,8PIN,CERAMIC
SN75119P TI

获取价格

 		DIFFERENTIAL LINE TRANSCEIVERS
SN75119P3 TI

获取价格

 		IC,LINE TRANSCEIVER,BIPOLAR,1 DRIVER,1 RCVR,DIP,8PIN,PLASTIC
SN75119PE4 TI

获取价格

 		Differential Line Transceiver 8-PDIP 0 to 70
SN75121 TI

获取价格

 		DUAL LINE DRIVERS
SN75121D TI

获取价格

 		DUAL LINE DRIVERS
SN75121J TI

获取价格

 		IC,LINE DRIVER,2 DRIVER,BIPOLAR,DIP,16PIN,CERAMIC
SN75121J-00 TI

获取价格

 		LINE DRIVER, CDIP16

与SN75119D相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证