SN74LXC1T45
SCES934A – SEPTEMBER 2021 – REVISED DECEMBER 2021
SN74LXC1T45 Single-Bit Dual-Supply Bus Transceiver With Configurable Level
Shifting
1 Features
3 Description
•
Fully configurable dual-rail design allows each port
to operate from 1.1 V to 5.5 V
The SN74LXC1T45 is
a
1-bit, dual-supply
noninverting bidirectional voltage level translation
device. The I/O pin A and control pin (DIR) are
referenced to VCCA logic levels, and the I/O pin B are
referenced to VCCB logic levels. The A pin is able to
accept I/O voltages ranging from 1.1 V to 5.5 V, while
the B pin can accept I/O voltages from 1.1 V to 5.5 V.
A high on DIR allows data transmission from A to B
and a low on DIR allows data transmission from B to
A. See Device Functional Modes for a summary of the
operation of the control logic.
•
•
•
•
Robust, glitch-free power supply sequencing
Up to 420-Mbps support for 3.3 V to 5.0 V
Schmitt-trigger inputs allow for slow or noisy inputs
I/O's with integrated dynamic pull-down resistors
help reduce external component count
Control inputs with integrated static pull-down
resistors allow for floating control inputs
High drive strength (up to 32 mA at 5 V)
Low power consumption
•
•
•
– 3-µA maximum (25°C)
Device Information (1)
– 6-µA maximum (–40°C to 125°C)
VCC isolation and Vcc disconnect (Ioff-float) feature
– If either VCC supply is < 100 mV or
disconnected, all I/O's get pulled-down and
then become high-impedance
Ioff supports partial-power-down mode operation
Compatible with LVC family level shifters
Control logic (DIR and OE) are referenced to VCCA
Operating temperature from –40°C to +125°C
Latch-up performance exceeds 100 mA per JESD
78, class II
PART NUMBER
SN74LXC1T45DRL
SN74LXC1T45DRY
SN74LXC1T45DBV
SN74LXC1T45DCK
SN74LXC1T45DTQ
PACKAGE
BODY SIZE (NOM)
1.60 mm × 1.20 mm
1.45 mm × 1.00 mm
2.90 mm × 1.60 mm
2.00 mm × 1.25 mm
1.00 mm × 0.80 mm
•
SOT (6)
SON (6)
SOT-23 (6)
SC70 (6)
X2SON (6)
•
•
•
•
•
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VCCA
VCCB
•
ESD protection exceeds JESD 22
– 4000-V human-body model
– 1000-V charged-device model
DIR
2 Applications
•
•
•
•
Eliminate slow or noisy input signals
Driving indicator LEDs or buzzers
Debouncing a mechanical switch
General purpose I/O level shifting
B1
A1
SN74LXC1T45 Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.