DATA SHEET
SMP1302 Series: Switch and Attenuator
Plastic Packaged PIN Diodes
Features
●
Designed for base station and handset applications
●
Low-distortion design
(1)
●
Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
●
Available in tape and reel packaging
Description
The SMP1302 series of plastic packaged, surface mountable,
low capacitance (0.3 pF) silicon PIN diodes is designed for
high-volume switch and attenuator applications from 10 MHz
Absolute Maximum Ratings
to beyond 2 GHz. These diodes are designed for use in low-
distortion PI and TEE attenuators with low drive current
(maximum resistance at 1 mA is 10 Ω) commonly used in TV
distribution and cellular base station applications. The nominal
50 µm I region width, combined with a maximum resistance of
3 Ω at 10 mA, makes these diodes useful in large signal switch
applications. Available as single and dual diodes in a selection
of plastic packages including SOT-23, SOD-323, small footprint
SC-79, an ultralow inductance (0.2 nH) SOT-143 (SMP1302-017)
and miniature SC-70. Available in a SOT-5 (SMP1302-027)
package as a four-diode array designed for insertion in the
commonly used four-diode PI attenuator circuit.
Characteristic
Value
200 V
Reverse voltage (V )
R
Power dissipation @ 25 °C lead
250 mW
temperature (P )
D
Storage temperature (T
)
ST
-65 °C to +150 °C
-65 °C to +150 °C
Class 1C
Operating temperature (T
ESD human body model
)
OP
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
NEW
1. SOT-5 (-027) MSL to be defined.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200043 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
1