MIL-STD-348B
Applicable standard
Operating
Storage
-55 °C to +125 °C ( 95 %RH Max.)
-55 °C to +125 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω ( 0 to 30 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA (DC or 1000 Hz)
Center contact
Outer contact
1000 MΩ Min.
6 mΩ Max.
6 mΩ Max.
X
X
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
V.S.W.R.
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
No flashover or breakdown.
X
Frequency
Frequency
Frequency
Frequency
0 to 6 GHz.
6 to 25 GHz.
25 to 30 GHz.
- to - GHz.
V.S.W.R.
V.S.W.R.
V.S.W.R.
--- dB Max.
1.2 Max.
1.35 Max.
1.5 Max.
-
-
-
Insertion loss
-
-
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ
--- by steel gauge.
Insertion force
--- N Max.
--- N Min.
18 N Max.
2.2 N Min.
-
-
X
-
-
-
-
Extraction force
Insertion force
Measured by applicable connector.
extraction forces
Extraction force
1)Contact resistance:
Center contact
[SMPJ-HKJ]
X
Mechanical operation
1000 times insertion and extractions.
12 mΩ Max.
12 mΩ Max.
X
-
Outer contact
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.(240h)
1)Insulation resistance:
(at high humidity)
100 MΩ Min.
X
X
-
-
2) Insulation resistance (at dry): 1000 MΩ Min.
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature -55 →
-
3
→ +125 →
30 →
-
3
°C
min.
Time
30 →
→
Under 5 cycles.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
V.S.W.R.
V.S.W.R.
1.2 Max. [0 to 6 GHz]
1.35 Max.[6 to 25 GHz]
X
X
X
-
-
-
V.S.W.R.
Designed
1.5 Max. [25 to 30 GHz]
Count
Description of revisions
Checked
Date
0
△
TO.KATAYAMA
18.06.13
18.06.12
18.06.12
18.06.12
Remark
Approved
Checked
Designed
Drawn
KY.SHIMIZU
TM.YOSHIDA
TM.YOSHIDA
Note
The characteristic after mounting on the board.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-375852-00-00
SPECIFICATION SHEET
SMP-LPR(SB)-SMT-1
CL338-1108-0-00
0
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1