Applicable standard
Operating
Storage
-55°C to +125 °C ( 95 %RH Max.)
-55 °C to +125 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω( 0 to 65 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 16 mΩ Max.
Outer contact 16 mΩ Max.
500 MΩ Min.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
Return loss
250 V DC.
250 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 40 GHz.
Frequency 40 to 65 GHz.
Frequency - to - GHz.
No flashover or breakdown.
Return loss 15 dB Min.
Return loss 10 dB Min.
--- dB Max.
X
X
Insertion loss
-
-
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
--- by steel gauge.
Insertion force
Extraction force --- N Min.
Insertion force --- N Max.
--- N Max.
-
-
-
-
-
-
-
-
Measured by applicable connector.
500 times insertion and extractions.
extraction forces
Extraction force --- N Min.
1)Contact resistance:
Mechanical operation
Center contact 28 mΩ Max.
Outer contact 28 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of -- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 500 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-65 → - → +125 → - °C
30 → 3 → 30 → 3 min.
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
Return loss 15 dB Min.
(Frequency 0 ~ 40 GHz.)
Return loss 10 dB Min.
(Frequency 40 ~65 GHz.)
Count
Description of revisions
Designed
Checked
Date
0
△
KY.SHIMIZU
TO.KATAYAMA
YI.FUNADA
16.02.09
16.02.09
16.02.09
16.02.09
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT
YI.FUNADA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-313092-00-00
SMPMP(SB)-HVP
SPECIFICATION SHEET
△0 1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL311-0420-4-00
FORM HD0011-2-1