Applicable standard
Operating
Storage
-55 °C to +125 °C ( 95 %RH Max.)
-55 °C to +125 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω ( 0 to 18 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA (DC or 1000 Hz)
Center contact
Outer contact
1000 MΩ Min.
6 mΩ Max.
6 mΩ Max.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
Return loss
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency
No flashover or breakdown.
0 to 10 GHz.
Return loss
Return loss
Return loss
--- dB Max.
20dB Max.
18dB Max.
15dB Max.
Frequency 10 to 15 GHz.
Frequency 15 to 18 GHz.
Frequency - to - GHz.
X
-
-
Insertion loss
-
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ
--- by steel gauge.
Insertion force
--- N Max.
--- N Min.
--- N Max.
--- N Min.
-
-
-
-
-
-
-
-
Extraction force
Insertion force
Measured by applicable connector.
500 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force
1)Contact resistance:
Center contact
12 mΩ Max.
12 mΩ Max.
X
-
Outer contact
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance:
(at high humidity)
2) Insulation resistance:
(at dry)
100 MΩ Min.
1000 MΩ Min.
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-65 → - → +125 → - °C
30 → 3 → 30 → 3 min.
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
Return loss
Return loss
Return loss
Designed
20dB Max.
18dB Max.
15dB Max.
Count
0
Description of revisions
Checked
Date
△
KY.SHIMIZU
KY.SHIMIZU
16.11.01
16.11.01
16.11.01
16.11.01
Remark
RoHS COMPLIANT
The characteristic after mounting on the board.
Approved
Checked
Designed
Drawn
TK.SAWAGUCHI
TK.SAWAGUCHI
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
ELC-364311-00-00
SMP-LPR(LD)-SMT-18G
CL338-1004-0-00
SPECIFICATION SHEET
Part No.
0
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1