TVS Diodes Datasheet
SMF4L-T1G Series
Surface Mount - 400 W, Low Leakage Performance
Pb e3
RoHS
Description
The SMF4L-T1G series protects sensitive systems or components
from high voltage, high energy transients. It offers a fast response
time, low Zener impedance, high surge and excellent clamping
capabilities. Because of its small size, it is ideal for use in cellular
phones, portable devices, business machines, power supplies and
other industrial and consumer applications.
Features
■ Zener transient overvoltage
30 kV (Contact)
suppressors
■ Small footprint: SOD123FL
package (footprint area of 8.45
mm2)
■ Working peak reverse voltage
range 5 V to 78 V for uni-
directional
Maximum Ratings &Thermal Characteristics
■ Supplied in 8 mm tape and
■ Peak power: 400 watts @
10/1000 µs
reel − 3,000 units per reel
Parameter
Symbol Value
Unit
■ Lead orientation in tape:
Maximum PPK Dissipation (PW−10/1000 µs)
(Note 1)
■ Low leakage
cathode lead to sprocket holes
PPK
PD
400
W
■ Response time is typically < 1 ■ These components are Pb−
ns
DC Power Dissipation @TA = 25 °C (Note 2)
Derate Above 25 °C
385
4.0
mW
mW/°C
°C/W
free and are RoHS compliant
■ ESD rating of class 3 (> 16 kV)
per human body model
Thermal Resistance from Junction to Ambient
(Note 2)
RƟJA
325
■ IEC-61000-4-2 ESD 30 kV(Air),
Thermal Resistance, Junction to Lead (Note 3)
Operating and StorageTemperature Range
RƟJL
26
°C/W
−55 to
+150
TJ, Tstg
°C
Stresses exceeding Maximum Ratings may damage the component. Maximum Ratings are
stress ratings only. Functional operation above the Recommended Operating Conditions is
not implied. Extended exposure to stresses above the Recommended Operating Conditions
may affect component reliability.
Applications
SMF4L-T1G Series is ideal for the protection of I/O interfaces, Vcc
bus and other vulnerable circuit used in cellular phones, portable
electronics, business machines, power supplies and other
consumer applications. The low leakage is particularly well suited
for battery operated electronics.
1. Non−repetitive current pulse atTA = 25 °C
2. Mounted with recommended minimum pad size, DC board FR−4.
3. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute
maximum.
Functional Diagram
Cathode
Anode
Uni-directional
© 2023 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: FW.08/18/23