5秒后页面跳转
SMDJ36 PDF预览

SMDJ36

更新时间: 2024-11-13 20:08:59
品牌 Logo 应用领域
力特 - LITTELFUSE /
页数 文件大小 规格书
6页 1078K
描述
Trans Voltage Suppressor Diode, 3000W, 36V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMC, 2 PIN

SMDJ36 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:DO-214AB
包装说明:R-PDSO-C2针数:2
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8541.10.00.50风险等级:5.52
其他特性:UL RECOGNIZED最大击穿电压:44.2 V
最小击穿电压:40 V击穿电压标称值:42.1 V
最大钳位电压:58.1 V配置:SINGLE
二极管元件材料:SILICON二极管类型:TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95代码:DO-214ABJESD-30 代码:R-PDSO-C2
JESD-609代码:e3湿度敏感等级:1
最大非重复峰值反向功率耗散:3000 W元件数量:1
端子数量:2最高工作温度:150 °C
最低工作温度:-65 °C封装主体材料:PLASTIC/EPOXY
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):260极性:UNIDIRECTIONAL
最大功率耗散:6.5 W认证状态:Not Qualified
最大重复峰值反向电压:36 V子类别:Transient Suppressors
表面贴装:YES技术:AVALANCHE
端子面层:Matte Tin (Sn)端子形式:C BEND
端子位置:DUAL处于峰值回流温度下的最长时间:40
Base Number Matches:1

SMDJ36 数据手册

 浏览型号SMDJ36的Datasheet PDF文件第2页浏览型号SMDJ36的Datasheet PDF文件第3页浏览型号SMDJ36的Datasheet PDF文件第4页浏览型号SMDJ36的Datasheet PDF文件第5页浏览型号SMDJ36的Datasheet PDF文件第6页 
TransientVoltage Suppression Diodes  
Surface Mount – 3000W > SMDJ series  
Pb e3  
RoHS  
SMDJ Series  
Description  
Uni-directional  
The SMDJ series is designed specifically to protect  
sensitive electronic equipment from voltage transients  
induced by lightning and other transient voltage events.  
Bi-directional  
Features  
• 3000W peak pulse power • Excellent clamping  
capability at 10/1000μs  
waveform, repetition rate  
(duty cycles):0.01%  
capability  
• Low incremental surge  
resistance  
• For surface mounted  
applications in order to  
optimize board space  
Typical IR less than 2μA  
when VBR min>12V  
• High temperature  
to reflow soldering  
Agency Approvals  
AGENCY  
AGENCY FILE NUMBER  
E230531  
• Low profile package  
Typical failure mode is  
short from over-specified  
voltage or current  
• Whisker test is conducted  
based on JEDEC  
JESD201A per its table 4a  
and 4c  
• IEC-61000-4-2 ESD  
guaranteed: 260°C/40sec  
• VBR @TJ= VBR@25°C  
x (1+αT x (TJ - 25))  
(αT:Temperature  
Coefficient, typical value  
is 0.1%)  
• Plastic package is  
flammability rated V-0 per  
Underwriters Laboratories  
• Meet MSL level1, per  
J-STD-020, LF maximun  
peak of 260°C  
• Matte tin lead–free plated  
• Halogen free and RoHS  
compliant  
• Pb-free E3 means 2nd  
level interconnect is  
Pb-free and the terminal  
finish material is tin(Sn)  
(IPC/JEDEC J-STD-  
609A.01)  
Maximum Ratings andThermal Characteristics  
(TA=25OC unless otherwise noted)  
Parameter  
Symbol  
PPPM  
Value  
3000  
Unit  
W
Peak Pulse Power Dissipation at  
TA=25ºC by 10/1000µs Waveform  
(Fig.2)(Note 1), (Note 2), (Note 5)  
Power Dissipation on Infinite Heat  
Sink atTL=50OC  
30kV(Air), 30kV (Contact)  
PD  
6.5  
W
A
• ESD protection of data  
lines in accordance with  
IEC 61000-4-2  
• EFT protection of data  
lines in accordance with  
IEC 61000-4-4  
• Built-in strain relief  
• Glass passivated chip  
junction  
Peak Forward Surge Current, 8.3ms  
Single Half Sine Wave (Note 3)  
IFSM  
300  
Maximum Instantaneous Forward  
Voltage at 100A for Unidirectional  
Only(Note 4)  
VF  
3.5/5.0  
V
OperatingTemperature Range  
StorageTemperature Range  
TJ  
-65 to 150  
-65 to 175  
°C  
°C  
TSTG  
TypicalThermal Resistance Junction  
to Lead  
°C/W  
°C/W  
RθJL  
RθJA  
15  
75  
• Fast response time:  
typically less than 1.0ps  
from 0V to BV min  
TypicalThermal Resistance Junction  
to Ambient  
Notes:  
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.  
Applications  
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.  
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional  
device only, duty cycle=4 per minute maximum.  
TVS devices are ideal for the protection of I/O Interfaces,  
CC bus and other vulnerable circuits used inTelecom,  
V
4. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.  
Computer, Industrial and Consumer electronic  
applications.  
5. The PPPM of stacked-die parts is 4000W and please contact littelfuse for the detail  
stacked-die parts.  
Functional Diagram  
Additional Infomarion  
Bi-directional  
Datasheet  
Samples  
Resources  
Cathode  
Anode  
Uni-directional  
© 2015 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 11/20/15  

与SMDJ36相关器件

型号 品牌 获取价格 描述 数据表
SMDJ36A LGE

获取价格

暂无描述
SMDJ36A PROTEC

获取价格

Trans Voltage Suppressor Diode, 3000W, Unidirectional, 1 Element, Silicon, DO-214AB
SMDJ36A DBLECTRO

获取价格

Transient Suppressor,
SMDJ36A LITTELFUSE

获取价格

Transient Voltage Suppression Diodes
SMDJ36A UNSEMI

获取价格

Surface Mount Transient Voltage Suppressors
SMDJ36A SOCAY

获取价格

Surface Mount Transient Voltage Suppressors (TVS)
SMDJ36A MDE

获取价格

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMDJ36A SUNMATE

获取价格

3000W plug-in TVS transient suppression diode SMC 36V
SMDJ36A MERITEK

获取价格

Transient Voltage Suppressors
SMDJ36A CJ

获取价格

SMCG