SMDJ5.0AG THRU SMDJ170AG
SMDJ5.0CAG THRU SMDJ170CAG
The SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
2
Unipolar
Bipolar
MECHANICAL DATA
• Case: SMC
1
• Terminals: Solderable per MIL-STD-750, Method 2026
• Approx. Weight: 0.22g / 0.0077oz
Simplified outline SMC and symbol
FEATURES
• Halogen-Free
• RoHS compliant
• Fast response time:typically less
than l.Ops from OV to BV min
• Excellent clamping capability
• Low incremental surge resistance
• Typical IR less than 2UA above 12V
• High Temperature soldering
guaranteed: 260℃/40 seconds
at terminals
• For surface mounted applications
in order to optimize board space
• Low profile package
• Built-in strain relief
• Typical maximum temperature coefficient
ΔVBR = 0.1% × VBR@25℃ × ΔT
• Glass passivated chip junction
• 3000W peak pulse power capability
at lOxlOOOUs waveform, repetition
rate {duty cycles):0.01 %
• Plastic package has Underwriters
Laboratory Flammability 94V-O
• Matte Tin Lead-free Plated
Maximum Ratings and Thermal Characteristics (TA=25℃ unless otherwise noted)
Symbol
PPPM
Parameter
Value
3000
Unit
W
Peak Pulse Power Dissipation at TA=25°C by 10x1000 us waveform
(Fig.l)(Note l), (Note 2)
Power Dissipation on infinite heat sink at TA=50℃
PM(AV)
6.5
W
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
IFSM
VF
300
3.5
A
V
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional only
Operating Junction and Storage Temperature Range
℃
Tj TSTG
-65 to 150
15
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
RUJL
RUJA
℃/W
℃/W
75
Notes:
1. Non-repetitive current pulse . per Fig 3 and derated above Ta = 25℃ per Fig. 2
2. Mounted on copper pad area of 0.31x0.31" (8.0 x 8.0mm) to each terminal
3. Measured on 8.3ms single half sine wave or eguivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum
REV.08
1 of 4