SMCJ SERIES
VOLTAGE 5.0V ~ 170V
Elektronische Bauelemente
1500W Peak Power Surface Mount TVS
RoHS Compliant Product
A suffix of "-C" specifies halogen & lead-free
FEATURES
* For surface mount application
* Built-in strain relief
* Excellent clamping capability
DO-214AB
* Low profile package
* Fast response time: Typically less than
1.0ps from 0 volt to BV min.
.124(3.15)
.245(6.22)
.220(5.59)
* Typical IR less than 1mA above 10V
* High temperature soldering guaranteed:
260 C / 10 seconds at terminals
.108(2.75)
.280(7.11)
.260(6.60)
.012(0.31)
.006(0.15)
MECHANICAL DATA
* Case: Molded plastic
.103(2.62)
.079(2.00)
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Solderable per MIL-STD-202,
method 208 guaranteed
.008
.050(1.27)
.030(0.76)
MAX.
(.203)
.320(8.13)
.305(7.75)
* Polarity: Color band denotes cathode end except Bidirectional
* Mounting position: Any
*
Weight: 0.21 grams
Dimensions in inches
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATINGS
SYMBOL
VALUE
Minimum 1500
UNITS
Watts
Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1)
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave
superimposed on rated load (JEDEC method) (NOTE 3)
PPK
IFSM
100
Amps
Maximum Instantenous Forward Voltage at 35.0A for
Unidirectional only
VF
3.5
Volts
C
Operating and Storage Temperature Range
TJ, TSTG
-55 to +150
NOTES:
1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2.
2
2. Mounted on Copper Pad area of 8.0mm (.013mm Thick) to each terminal.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types SMCJ5.0 thru SMCJ170.
2. Electrical characteristics apply in both directions.
http://www.SeCoSGmbH.com
Any changing of specification will not be informed individual
01-Jun-2002 Rev. A
Page 1 of 4