SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
Available
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• Excellent clamping capability
• Very fast response time
SMC (DO-214AB)
Available
• Low incremental surge resistance
Cathode
Anode
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
(unidirectional)
(bidirectional)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
D
3D Models
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
VBR unidirectional
6.40 V to 231 V
V
BR bidirectional
6.40 V to 231 V
5.0 V to 188 V
1500 W
VWM
PPPM
PD
MECHANICAL DATA
Case: SMC (DO-214AB)
6.5 W
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
IFSM (unidirectional only)
200 A
TJ max.
150 °C
Polarity
Unidirectional, bidirectional
SMC (DO-214AB)
Package
DEVICES FOR BIDIRECTION APPLICATIONS
(“_X” denotes revision code e.g. A, B, ...)
For bidirectional devices use CA suffix (e.g. SMCJ188CA).
Electrical characteristics apply in both directions.
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2)
Peak pulse current with a 10/1000 μs waveform (1)
Power dissipation on infinite heatsink, TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave unidirectional only
Operating junction and storage temperature range
IPPM
See next table
6.5
A
PD
W
(2)
IFSM
200
A
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
Revision: 30-Jun-2021
Document Number: 88394
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000