SMBJ5.0A thru SMBJ188CA
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a 10/1000 μs
waveform, repetitive rate (duty cycle): 0.01 %
• Excellent clamping capability
DO-214AA (SMB J-Bend)
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
PRIMARY CHARACTERISTICS
VWM
5.0 V to 188 V
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PPPM
600 W
100 A
I
FSM (uni-directional only)
• Halogen-free according to IEC 61249-2-21 definition
TJ max.
150 °C
MECHANICAL DATA
Case: DO-214AA (SMBJ)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3
- halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional use C or CA suffix (e.g. SMBJ10CA).
Electrical characteristics apply in both directions.
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
600
UNIT
W
(1)(2)
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1)
Peak pulse current with a 10/1000 μs waveform
PPPM
(1)
IPPM
See next table
100
A
(2)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only
Operating junction and storage temperature range
IFSM
A
TJ, TSTG
- 55 to + 150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 20-Dec-11
Document Number: 89284
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000