SMBJ5.0 thru 188CA
Vishay Semiconductors
formerly General Semiconductor
Surface Mount TRANSZORB®
Transient Voltage Suppressors
Stand-off Voltage 5.0 to 188V
Peak Pulse Power 600W
DO-214AA
(SMB J-Bend)
Cathode Band
0.086 (2.20)
0.077 (1.95)
0.155 (3.94)
0.130 (3.30)
Mounting Pad Layout
0.085 MAX
(2.16 MAX)
0.180 (4.57)
0.160 (4.06)
0.086 MIN
(2.20 MIN)
0.012 (0.305)
0.006 (0.152)
0.096 (2.44)
0.084 (2.13)
0.060 MIN
(1.52 MIN)
0.220 REF
Dimensions in inches
and (millimeters)
0.060 (1.52)
0.030 (0.76)
0.008
(0.203)
Max.
0.220 (5.59)
0.205 (5.21)
Features
Mechanical Data
• Underwriters Laboratory Recognition under UL standard
for safety 497B: Isolated Loop Circuit Protection
Case: JEDEC DO-214AA molded plastic over
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
• Low profile package with built-in strain relief for surface
mounted applications
Polarity: For unidirectional types the band denotes the
cathode, which is positive with respect to the anode
under normal TVS operation
• Glass passivated junction
• Low incremental surge resistance, excellent clamping
capability
Weight: 0.003 oz., 0.093 g
• 600W peak pulse power capability with a 10/1000µs
Flammability: Epoxy is rated UL 94V-0
waveform, repetition rate (duty cycle): 0.01%
Packaging Codes – Options (Antistatic):
51 – 2K per Bulk box, 20K/carton
• Very fast response time
• High temperature soldering guaranteed:
250°C/10 seconds at terminals
52 – 750 per 7" plastic Reel (12mm tape), 15K/carton
5B – 3.2K per 13" plastic Reel (12mm tape), 32K/carton
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions.
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
PPPM
IPPM
Value
Minimum 600
See Table Below
100
Unit
Peak pulse power dissipation with
a 10/1000µs waveform(1)(2) (Fig. 1)
W
Peak pulse current with a 10/1000µs waveform(1)
A
Peak forward surge current 8.3ms single half sine-wave
uni-directional only(2)
IFSM
A
Typical thermal resistance, junction to ambient(4)
RθJA
RθJL
100
20
°C/W
°C/W
°C
Typical thermal resistance, junction to lead
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2
(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(3) Mounted on minimum recommended pad layout
Document Number 88392
19-Apr-04
www.vishay.com
1