SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage
Peak Pulse Power
5.0 to 170 Volts
600 Watts
SMB5.0 THRU SMB170CA
FEATURES
·
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
DO-214AA(SMB)
·
For surface mounted applications in order to optimize
board space
·
·
·
·
Low profile package
Built-in strain relief
Glass passivated junction
Low incremental surge resistance
·
600W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 Volts to
V (BR) for unidirectional and 5.0ns for bidirectional types
For devices with V (BR) ≥10V, ID are typically ID less than 1.0μA
High temperature soldering guaranteed:
250℃/10 seconds at terminals
·
·
·
·
Dimensions in inches and (millimeters)
MECHANICAL DATA
·
·
·
·
·
Cass: JEDEC DO-214AA,molded plastic body over passivated junction
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color bands denotes positive end (cathode) except bidirectional
Mounting position: any
Weight: 0.003 ounces, 0.093 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
·
For bidirectional use C or CA suffix for types SMB-5.0 thru SMB-170 (e.g. SMBG5.0C,SMBJ170CA)
.Electrical Characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
·
Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Symbols
Value
Unit
PPPM
IPPM
Minimum 600
See Table 1
Watts
Amps
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,2,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current, 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (Note2,3) – unidirectional only
IFSM
VF
100.0
Amps
Volts
Maximum instantaneous forward voltage at 50A (NOTE 3,4)
unidirectional only (NOTE 3)
SEE NOTE 4
Operating Junction and Storage Temperature Range
TJ, TSTG
50 to +150
℃
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on 0.2×0.2” (5.0×5.0mm) copper pads to each terminal
3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum.
4. VF=3.5 V on SMB thru SMB-90 devices and VF=5.0V on SMB-100 thru SMB-170 devices