SMAJ5.0A thru SMAJ188CA
www.vishay.com
Vishay General Semiconductor
®
Surface-Mount TRANSZORB Transient Voltage Suppressors
FEATURES
Available
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 % (300 W above 78 V)
SMA (DO-214AC)
Available
Cathode
Anode
• Excellent clamping capability
• Very fast response time
(unidirectional)
(bidirectional)
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
LINKS TO ADDITIONAL RESOURCES
3
D
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
3D Models
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VBR uni-directional
6.40 V to 231 V
MECHANICAL DATA
V
BR bi-directional
6.40 V to 231 V
5.0 V to 188 V
400 W, 300 W
3.3 W
Case: SMA (DO-214AC)
VWM
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
PPPM
PD
IFSM
40 A
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
TJ max.
Polarity
Package
150 °C
Unidirectional, bidirectional
SMA (DO-214AC)
(“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
DEVICES FOR BIDIRECTION APPLICATIONS
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
For bidirectional use CA suffix (e.g. SMAJ10CA).
Electrical characteristics apply in both directions.
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
400
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)
Peak pulse current with a waveform (1)
IPPM
See next table
3.3
A
Power dissipation on infinite heatsink at TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2)
Operating junction and storage temperature range
PD
W
IFSM
40
A
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 300 W above 78 V
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 30-Jun-2021
Document Number: 88390
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000