SMA6J5.0 thru 40A
New Product
Vishay Semiconductors
formerly General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
DO-214AC (SMA)
Stand-off Voltage 5.0 to 40V
Peak Pulse Power 600W
Cathode Band
0.065 (1.65)
0.049 (1.25)
0.110 (2.79)
0.100 (2.54)
Mounting Pad Layout
0.066 MIN.
(1.68 MIN.)
0.094 MAX.
(2.38 MAX.)
0.177 (4.50)
0.157 (3.99)
Dimensions in inches
and (millimeters)
0.012 (0.305)
0.006 (0.152)
0.052 MIN.
(1.32 MIN.)
0.220
(5.58) REF
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
MAX.
0.208 (5.28)
0.194 (4.93)
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Optimized for LAN protection applications
• Ideal for ESD protection of data lines in
accordance with IEC 1000-4-2 (IEC801-2)
• Ideal for EFT protection of data lines in
accordance with IEC 1000-4-4 (IEC801-4)
• Low profile package with built-in strain relief for
Mechanical Data
Case: JEDEC DO-214AC molded plastic over
passivated chip
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
250°C/10 seconds at terminals
Polarity: The band denotes the cathode, which is
positive with respect to the anode under normal TVS
operation
surface mounted applications
• Glass passivated junction
• Low incremental surge resistance, excellent clamping
capability
• 600W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
Mounting Position: Any
Packaging Codes – Options (Antistatic):
51 – 1K per Bulk box, 20K/carton
61 – 1.8K per 7" plastic Reel (12mm tape), 36K/carton
5A – 7.5K per 13" plastic Reel (12mm tape), 75K/carton
Weight: 0.002 oz., 0.064 g
• Very fast response time
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
PPPM
IPPM
Value
Unit
Peak pulse power dissipation with
600
W
a 10/1000µs waveform(1,2) (see fig. 1)
Peak pulse current with a 10/1000µs waveform(1)
See Next Table
70
A
Peak forward surge current 8.3ms single half sine-wave
uni-directional only(2)
IFSM
A
Typical thermal resistance, junction to ambient(3)
RθJA
RθJL
110
25
°C/W
°C/W
°C
Typical thermal resistance, junction to lead
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2
(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(3) Mounted on minimum recommended pad layout
Document Number 88389
07-May-02
www.vishay.com
1