SMA6J SERIES
5V ~ 58V, 600W
Peak Power Surface Mount TVS
Elektronische Bauelemente
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and lead-free
FEATURES
SMA
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Glass passivated chip
600W peak pulse power capability with a 10/1000 µs waveform
Low leakage
Uni- and Bi-directional unit
Excellent clamping capability
Very fast response time
RoHS compliant
B
A
C
H
MECHANICAL DATA
D
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Case: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Solderable per MIL-STD-750, method 2026
Polarity: Color band denotes cathode end except Bipolar
Mounting position: Any
G
E
F
Millimeter
Millimeter
Min. Max.
0.3
REF.
REF.
Min.
1.24
3.99
2.30
1.90
Max.
1.65
4.75
2.90
2.62
A
B
C
D
E
F
G
-
4.80
0.76
0.15
5.28
1.52
0.31
PACKAGE INFORMATION
H
Package
MPQ
Leader Size
SMA
5K
13 inch
ORDER INFORMATION
Part Number
Directional
Type
SMA6J5.0A~SMA6J58A
SMA6J5.0A-C~SMA6J58A-C
SMA6J5.0CA~SMA6J58CA
SMA6J5.0CA-C~SMA6J58CA-C
Lead (Pb)-free
Uni
Lead (Pb)-free and Halogen-free
Lead (Pb)-free
Bi
Lead (Pb)-free and Halogen-free
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.)
Rating
Symbol
PPK
Value
Unit
Peak Power Dissipation@ a 10/1000µs waveform 1
Peak Pulse Current@ a 10/1000µs waveform 1
Power Dissipation@ on a infinite heat sink at TL=75°C
600
W
A
IPP
See next table
3
P D
W
Peak Forward Surge Current@ 8.3ms single Half
Sine-Wave, for unidirectional only 2
IFSM
60
A
Maximum Instantaneous Forward voltage@ at 25A
for unidirectional only
VF
3.5
V
Operating Junction and Storage Temperature Range
TJ, TSTG
-55 ~ 150
°C
Notes:
1. Non-repetitive current pulse is on Fig. 5 and it derated above TA=25°C on Fig. 1.
2. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
http://www.SeCoSGmbH.com/
Any changes of specification will not be informed individually.
11-Jan-2018 Rev. B
Page 1 of 3