SM802XXX
Flexible Ultra-Low Jitter Clock Synthesizer
Clockworks™ FLEX
General Description
Features
The SM802xxx series is a member of the ClockWorks™
family of devices from Micrel and provide an extremely
low-noise timing solution for applications such as (1-100)
Gigabit Ethernet, SONET, Wireless base station, Satellite
communication, Fibre Channel, SAS/SATA and PCI-e. It is
based upon a unique PLL architecture that provides less
than 250fs phase jitter.
• 115fs at 156.25MHz (1.875MHz to 20MHz)
• 245fs at 156.25MHz (12kHz to 20MHz)
• On chip power supply regulation for excellent board
level power supply noise immunity
• Generates up to 8 combinations of differential or 16
single-ended clock outputs.
− LVPECL, LVDS, HCSL, LVCMOS (SE or Diff)
• Selectable input:
The devices operate from a 2.5V or 3.3V power supply
and synthesize up to 8 different combinations (LVPECL,
LVDS, HCSL) of differential or 16 single ended output
clocks. The devices accept an external reference clock or
crystal input.
− Crystal: 11MHz to 30MHz
− Reference input: 11MHz to 80MHz
• No external crystal oscillator capacitors required
• 2.5V or 3.3V operating power supply
• Available in Industrial Temperature range
The SM802xxx series is fully programmable and a web
tool is available to configure a part for samples at:
http://clockworks.micrel.com/micrel/
• Available in Green, RoHS, and PFOS compliant QFN
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com.
packages:
− 44-pin, 7mm × 7mm
− 32-pin, 5mm × 5mm
− 24-pin, 4mm × 4mm
− 16-pin, 3mm × 3.5mm
Block Diagram
Applications
• 1/10/40/100 Gigabit Ethernet – (GbE)
• SONET/SDH
• PCI-Express
• CPRI/OBSAI – Wireless base station
• Fibre Channel
• SAS/SATA
• DIMM
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Revision 1.0
hbwhelp@micrel.com or (408) 955-1690
June 6, 2013