SM6T Series
Vishay General Semiconductor
www.vishay.com
®
Surface-Mount TRANSZORB Transient Voltage Suppressors
FEATURES
Available
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• 600 W peak pulse power capability with a
10/1000 μs waveform
Available
• Excellent clamping capability
• Low inductance
SMB (DO-214AA)
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
Cathode
Anode
• AEC-Q101 qualified available
(unidirectional)
(bidirectional)
- Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3
D
TYPICAL APPLICATIONS
3D Models
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.80 V to 188 V
V
BR unidirectional
6.8 V to 220 V
6.8 V to 220 V
600 W
MECHANICAL DATA
V
BR bidirectional
Case: SMB (DO-214AA)
PPPM
PD
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
5.0 W
I
FSM (unidirectional only)
100 A
TJ max.
150 °C
Polarity
Unidirectional, bidirectional
SMB (DO-214AA)
Package
(“_X” denotes revision code e.g. A, B, ...)
DEVICES FOR BIDIRECTION APPLICATIONS
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
For bidirectional devices use CA suffix (e.g. SM6T12CA).
Electrical characteristics apply in both directions.
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
600
UNIT
W
Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TA = 50 °C
Peak forward surge current 10 ms single half sine-wave unidirectional only (2)
Operating junction and storage temperature range
IPPM
See next table
5.0
A
PD
W
IFSM
100
A
TJ, TSTG
-65 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 19-Apr-2021
Document Number: 88385
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000