SLG51000
PMIC with High PSRR, Low Noise, Multi-Output LDOs
and Integrated Load Switches
General Description
SLG51000 contains seven compact and customizable low dropout regulators and is designed for
high performance camera modules and other small multi-rail applications.
Two integrated LDOs are optimized to meet the requirements of high-performance analog circuits.
They provide very low output voltage noise characteristics of 13 µV (rms) in addition to high PSRR of
81 dB at 1 MHz and tight output voltage accuracy of ±1 % over temperature.
Two LDOs can be configured to operate as load switches which are optimized to meet the
requirements of low RON. By using efficient DC-DC switching regulators upstream in conjunction with
SLG51000’s linear regulators and load switches downstream, applications can leverage the best
characteristics of each to simultaneously achieve low power, low noise, and low voltage dropout,
respectively.
Built-in safety protection such as under-voltage lockout, over-temperature protection, and current
limit ensures that the ICs are operating under nominal conditions. SLG51000 has an I2C-compatible
interface for flexible power control. SLG51000 is available in a small 20-pin WLCSP package with a
wide ambient operating temperature range of -40 °C to 85 °C.
Key Features
■
Input voltage range:
■
Low dropout voltage (10 mV per 100 mA of
load) for high current LDO supply rails (2 x LV
LDO)
□
□
□
□
2.8 V to 5.0 V (2 x HP LDO)
1.7 V to 5.0 V (3 x HV LDO)
0.8 V to 1.5 V (2 x LV LDO)
0.5 V to 1.25 V (2 x load switch)
■
■
Ultra-low RON load switches with low leakage
and slew rate control for low VIN supplies
Tight output voltage accuracy of ±1 %
over-temperature
■
■
Separate input supply and enable pins for
flexible power configurations
■
■
■
Low shutdown current of 300 nA
Low quiescent current of 14 µA
User configurable settings via I2C interface
and OTP
Output voltage range:
□
□
□
2.4 V to 3.3 V (2 x HP LDO)
1.2 V to 3.75 V (3 x HV LDO)
0.5 V to 1.2 V (2 x LV LDO)
□
Including output voltage, power
sequencing, soft-start timing, and current
limit threshold
■
Output current levels:
□
□
□
□
Up to 475 mA (2 x HP LDO)
Up to 500 mA (3 x HV LDO)
Up to 800 mA (2 x LV LDO)
Up to 800 mA (2 x load switch)
■
■
■
■
■
■
Soft start and soft shutdown
Under-voltage lockout (UVLO)
Thermal shutdown
Configurable temperature alerts
Wide -40 °C to +85 °C operating temperature
■
■
High PSRR of 102 dB at 1 kHz and
81 dB at 1 MHz (2 x HP LDO)
20-pin WLCSP: 1.675 mm x 2.075 mm x
0.465 mm, 0.4 mm pitch
Ultra-low output voltage noise of 13 µV (2 x
HP LDO)
Applications
■
■
High End Camera Module Applications
Smartphones
■
■
Digital Cameras
Smart Devices with Imaging
Datasheet
Revision 3.11
10-May-2022
CFR0011-120-00
1 of 25
© 2022 Renesas Electronics Corporation