SLG51001
PMIC with High PSRR, Low Noise, Multi-Output LDOs
and Integrated Load Switch
General Description
SLG51001 contains six compact and customizable low dropout regulators and is designed for high
performance camera modules and other small multi-rail applications.
The LDO_HP is optimized to meet the requirements of high-performance analog circuits. It provides
very low output voltage noise characteristics of 13 µV (rms) in addition to high PSRR of 81 dB at
1 MHz and tight output voltage accuracy of ±1 % over temperature.
The 1 A capable LDO_LV can be configured to operate as a load switch which is optimized to meet
the requirements of low RON. By using efficient DC-DC switching regulators upstream in conjunction
with SLG51001’s linear regulators and load switch downstream, applications can leverage the best
characteristics of each to simultaneously achieve low power, low noise, and low voltage dropout,
respectively.
Built-in safety protection such as under-voltage lockout, over-temperature protection, and current limit
ensures that the ICs are operating under nominal conditions. SLG51001 has an I2C-compatible
interface for flexible power control. SLG51001 is available in a small 16-pin WLCSP package with a
wide ambient operating temperature range of -40 °C to 85 °C.
Key Features
■
Input voltage range:
■
Low dropout voltage (10 mV per 100 mA of
load) for high current LDO supply rail (LV
LDO)
□
□
□
□
2.8 V to 5.0 V (1 x HP LDO)
1.7 V to 5.0 V (4 x HV LDO)
0.8 V to 1.5 V (1 x LV LDO)
0.5 V to 1.25 V (1 x load switch)
■
■
Ultra-low RON load switch with low leakage and
slew rate control for low VIN supplies
Tight output voltage accuracy of ±1 %
over-temperature
■
■
Separate input supply and enable pins for
flexible power configurations
■
■
■
Low shutdown current of 300 nA
Output voltage range:
Low quiescent current of 14 µA
User configurable settings via I2C interface
and OTP
□
□
□
2.4 V to 3.3 V (1 x HP LDO)
1.2 V to 3.75 V (4 x HV LDO)
0.5 V to 1.2 V (1 x LV LDO)
□
Including output voltage, power
sequencing, soft-start timing, and current
limit threshold
■
Output current levels:
□
□
□
□
Up to 475 mA (1 x HP LDO)
Up to 500 mA (4 x HV LDO)
Up to 1 A (1 x LV LDO)
■
■
■
■
■
■
Soft start and soft shutdown
Under-voltage lockout (UVLO)
Thermal shutdown
Up to 1 A (1 x load switch)
Configurable temperature alerts
Wide -40 °C to +85 °C operating temperature
■
■
High PSRR of 102 dB at 1 kHz and 81 dB at
1 MHz (1 x HP LDO)
16-pin WLCSP: 1.675 mm x 1.675 mm x
0.465 mm, 0.4 mm pitch
Ultra-low output voltage noise of 13 µV (1 x
HP LDO)
Applications
■
■
High End Camera Module Applications
Smartphones
■
■
Digital Cameras
Smart Devices with Imaging
Datasheet
Revision 3.01
10-May-2022
CFR0011-120-00
1 of 25
© 2022 Renesas Electronics Corporation