NON-ISOLATED DC/DC CONVERTERS
3 Vdc – 14.4 Vdc Input, 0.6 Vdc - 5.5 Vdc /6 A Outputs
Jul. 13, 2015
Bel Power Inc., a subsidiary of Bel Fuse Inc.
SLAN-06D2Ax
Features
RoHS Compliant
Rev.B
Non-Isolated
Cost efficient open frame design
Ability to sink and source current
DOSA based
Power Good signal
Remote On/Off
Overtemperature protection
Fixed switching frequency
Compliant to IPC-9592 (September 2008), Category 2, Class II
Compliant to RoHS EU Directive 2002/95/EC
Compatible in a Pb-free or SnPb reflow environment
Output voltage programmable from 0.6Vdc to 5.5Vdc via external resistor.
Tunable LoopTM to optimize dynamic output voltage response
Output overcurrent protection (non-latching)
Wide operating temperature range [-40°C to 85°C]
Wide Input voltage range (3Vdc-14.4Vdc).Ref.to Figure 41 for corresponding output range.
UL60950-1 Recognized (UL/cUL)
Small size:12.2mm×12.2mm×7.25mm(0.48 in×0.48 in×0.29 in)
ISO 9001 and ISO 14001 certified manufacturing facilities
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Industrial equipment
Description
The SLAN-06D2Ax power modules are non-isolated dc-dc converters that can deliver up to 6A of output current.
These modules operate over a wide range of input voltage (VIN = 3Vdc-14.4Vdc) and provide a precisely
regulated output voltage from 0.6Vdc to 5.5Vdc, programmable via an external resistor. Features include remote
On/Off, adjustable output voltage, over current and over temperature protection. The Tunable LoopTM feature
allows the user to optimize the dynamic response of the converter to match the load with reduced amount of
output capacitance leading to savings on cost and PWB area.
Part Selection
Max. Output Max. Output
Typical
Efficiency
Model Number Model Number
Output Voltage
Input Voltage
Current
Power
Active High
Active Low
0.6 - 5.5 Vdc
3 - 14.4 Vdc
6 A
33W
94%
SLAN-06D2A0
SLAN-06D2AL
Notes: 1. Add “R” suffix at the end of the model number to indicate tape and reel packaging (Standard).
2. Add “G” suffix at the end of the model number to indicate tray packaging (Option).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
1