SiP21102
Vishay Siliconix
150-mA Low-Noise LDO Regulator
With Error Flag and Discharge
FEATURES
DESCRIPTION
•
•
Ultra low dropout - 130 mV at 150 mA load
Low noise - 75 µVRMS (10 Hz to 100 kHz
bandwidth)
Out-of-regulation error flag (power good)
Shutdown control
110 µA ground current at 150 mA load
1.5 % guaranteed output voltage accuracy
300 mA peak output current capability
Uses low ESR ceramic capacitors
Fast start-up (50 µs)
Fast line and load transient response (≤ 30 µs)
1 µA maximum shutdown current
Output current limit
The SiP21102 is a 150 mA CMOS LDO (low dropout) voltage
regulator. It is the perfect choice for low voltage, low power
applications. An ultra low ground current makes this part
attractive for battery operated power systems. The SiP21102
also offers ultra low dropout voltage to prolong battery life in
portable electronics. Systems requiring a quiet voltage
source, will benefit from the SiP21102’s low output noise.
The SiP21102 is designed to maintain regulation while
delivering 300 mA peak current, making it ideal for systems
that have a high surge current upon turn-on.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For better transient response and regulation, an active pull-
down circuit is built into the SiP21102 to clamp the output
voltage when it rises beyond normal regulation. The
SiP21102 automatically discharges the output voltage by
connecting the output to ground through a 100 Ω n-channel
MOSFET when the device is put in shutdown mode.
Reverse battery protection
Built-in short circuit and thermal protection
Output, auto-discharge In shutdown mode
Fixed 1.2 V, 1.8 V, 2.5 V, 2.6 V, 2.8 V, 2.85 V, 3.0 V,
3.3 V, 5.0 V output voltage options
SC70-5 package
The SiP21102 features reverse battery protection to limit
reverse current flow to approximately 1 µA in the event
reversed battery is applied at the input, thus preventing
damage to the IC.
•
•
Compliant to RoHS Directive 2002/95/EC
The SiP21102 is available in a lead (Pb)-free 5-pin SC70
package for operation over the industrial operating range
(- 40 °C to 85 °C).
APPLICATIONS
•
Cellular phones, wireless handsets
•
Noise-sensitive electronic systems, laptop and palmtop
computers
•
•
•
•
•
PDAs
Pagers
Digital cameras
MP3 player
Wireless modem
TYPICAL APPLICATION CIRCUIT
SiP21102
5
V
IN
1
V
IN
V
OUT
V
OUT
1 µF
1 µF
51 kΩ
2
3
GND
SD
SD
ERROR
4
ERROR
SC70, 5-Lead
* Pb containing terminations are not RoHS compliant, exemptions may apply.
Document Number: 73213
S09-1453-Rev. E, 03-Aug-09
www.vishay.com
1