SiP21103
Vishay Siliconix
250-mA Ultra Low-Noise LDO Regulator
with Discharge Option
DESCRIPTION
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ultra low dropout - 250 mV at 250 mA load
Ultra low noise - 30 µVRMS (10 Hz to 100 kHz)
Shutdown control
The SiP21103 is a 250 mA CMOS LDO (low dropout)
voltage regulator. It is the perfect choice for low voltage, low
power applications. An ultra low ground current makes this
part attractive for battery operated power systems. The
SiP21103 also offers ultra low dropout voltage to prolong
battery life in portable electronics. Systems requiring a quiet
voltage source, such as RF applications, will benefit from the
SiP21103’s ultra low output noise. An external noise bypass
capacitor connected to the device’s BP pin can further
reduce the noise level. The SiP21103 is designed to
maintain regulation while delivering 400 mA peak current,
making it ideal for systems that have a high surge current
upon turn-on.
130 µA ground current at 250 mA load
2 % guaranteed output voltage accuracy
400 mA peak output current capability
Uses low ESR ceramic capacitors
Fast start-up (50 µs)
Fast line and load transient response (≤ 30 µs)
1 µA maximum shutdown current
Output current limit
Reverse battery protection
Built-in short circuit and thermal protection
Output, auto-discharge in shutdown mode
Fixed 1.2 V, 1.8 V, 2.5 V, 2.6 V, 2.8 V, 2.85 V, 3.0 V, 3.3 V,
5.0 V output voltage options
MLP22-5 PowerPAK® package
Compliant to RoHS directive 2002/95/EC
For better transient response and regulation, an active pull-
down circuit is built into the SiP21103 to clamp the output
voltage when it rises beyond normal regulation. The
SiP21103 automatically discharges the output voltage by
connecting the output to ground through a 100 Ω N-channel
MOSFET when the device is put in shutdown mode.
•
•
The SiP21103 features reverse battery protection to limit
reverse current flow to approximately 1 µA in the event
reversed battery is applied at the input, thus preventing
damage to the IC.
APPLICATIONS
•
Cellular phones, wireless handsets
•
Noise-sensitive electronic systems, laptop and palmtop
computers
The SiP21103 is available in a lead (Pb)-free 5-pin MLP22
PowerPAK package and is specified to operate over the
industrial temperature range of - 40 °C to 85 °C.
•
•
•
•
•
PDAs
Pagers
Digital cameras
MP3 player
Wireless modem
TYPICAL APPLICATION CIRCUIT
SiP21103
3
1
2
V
V
V
V
OUT
4
5
IN
IN
OUT
2.2 µF
2.2 µF
SD
SD
GND
BP
10 nF
MLP22-5
* Pb containing terminations are not RoHS compliant, exemptions may apply .
Document Number: 73392
S09-1453-Rev. D, 03-Aug-09
www.vishay.com
1