Dual 5A, High-Speed, Low-Side Gate Driver
with Negative Input Voltage Capability
SGM48524Q
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
TOP MARKING
PACKING
OPTION
MODEL
SGM
009S8
XXXXX
SGM48524Q
SOIC-8
SGM48524QS8G/TR
Tape and Reel, 4000
-40℃ to +125℃
MARKING INFORMATION
NOTE: XXXXX = Date Code, Trace Code and Vendor Code.
X X X X X
Vendor Code
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
Supply Voltage, VDD........................................... -0.3V to 20V
INA, INB, ENA, ENB Voltage................................ -8V to 20V
OUTA, OUTB Voltage (DC) .....................-0.3V to VDD + 0.3V
OUTA, OUTB Voltage (Pulse < 200ns).......-2V to VDD + 0.3V
Maximum Output Pulsed Source/Sink Current (0.5µs),
I
OUT_PULSED..........................................................................5A
Package Thermal Resistance
SOIC-8, θJA .............................................................. 120℃/W
SOIC-8, θJC................................................................ 54℃/W
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................4000V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range.........................................4.5V to 18V
Input Voltage, INA, INB......................................... -2V to 18V
Enable Voltage, ENA and ENB............................. -2V to 18V
Operating Ambient Temperature Range......-40℃ to +125℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
MAY 2023
2