SGM48536/SGM48537
SGM48538/SGM48539/SGM48540
Single High-Speed, Low-Side Gate
Drivers with Negative Input Voltage Capability
GENERAL DESCRIPTION
FEATURES
The SGM48536/37/38/39/40 are single high-speed low-
side gate drivers for MOSFET and IGBT power
switches. These devices can provide rail-to-rail driving
capability and very small propagation delays (18.5ns,
TYP). They also provide 4A peak source current and 8A
peak sink current (asymmetrical drive) when VDD = 12V.
The input can withstand a maximum negative voltage
of -10V.
● Asymmetrical Drive
4A Peak Source Current
8A Peak Sink Current
● TTL and CMOS Compatible Logic Threshold
● Logic Levels Independent of Supply Voltage
● Hysteretic Input Logic for High Noise Immunity
● Outputs are Logic Low when Inputs are Floating
● Negative Voltage Handling Capability:
-10V DC at Inputs
The operating voltage range is 9V to 25V. The devices
feature under-voltage lockout (UVLO) function. After
UVLO is triggered, the output remains low.
-2V, 200ns Pulse for Outputs
● Glitch-Free Operation at Power-Up and Power-
Down: Outputs are Pulled Low during Supply UVLO
● Fast Propagation Delay: 18.5ns (TYP)
● Fast Rise Time: 9.5ns (TYP)
The SGM48536 adopts separate output architecture.
The separate output structure with asymmetric drive
improves the immunity of the device to the parasitic
Miller conduction effect and reduces ground bounce.
● Fast Fall Time: 8ns (TYP)
● SGM48536 Separate Output Options Allow for
Tuning of Turn-on and Turn-off Currents
● SGM48537 Dual Input Design (Choice of an
Inverting (IN-) or Non-Inverting (IN+) Driver
Configuration)
The SGM48537 adopts a dual-input design. IN+ or IN-
can independently control the output of the driver. The
unused pin can be functioned as an enable control pin.
In order to ensure that the output remains low when an
input pin is floating, these input pins have internal
pull-up and pull-down resistors.
Unused Input Pin Can be Used for Enable or
Disable Function
● Input Pin Absolute Maximum Voltage Levels Not
Restricted by VDD Pin Bias Supply Voltage
The input thresholds of these devices are compatible
with low voltage TTL and CMOS logic, which will not be
affected by VDD changes. A Schmitt trigger is used at
the input, and a wide range of hysteresis voltage is
designed to enhance the immunity.
● -40℃ to +140℃ Operating Temperature Range
● Packaging:
SGM48536 Available in a Green SOT-23-6 Package
SGM48537/38/39/40 Available in a Green SOT-23-5
Package
The SGM48536 is available in a Green SOT-23-6
package. The SGM48537/38/39/40 are all available in
a Green SOT-23-5 package.
APPLICATIONS
Power MOSFETs
IGBT Driving for Power Supplies
DC/DC Converters
Solar Power, Motor Drivers
SG Micro Corp
JANUARY 2023 – REV. A. 1
www.sg-micro.com