120V Boot, 4A Peak, High Frequency
High-side and Low-side Driver
SGM48211
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM
48211XS8
XXXXX
SGM
48211XPS8 Tape and Reel, 4000
XXXXX
SGM48211
XTGW8
XXXXX
SOIC-8
SGM48211XS8G/TR
SGM48211XPS8G/TR
SGM48211XTGW8G/TR
Tape and Reel, 4000
-40℃ to +140℃
-40℃ to +140℃
-40℃ to +140℃
SGM48211 SOIC-8 (Exposed Pad)
TDFN-4×4-8AL
Tape and Reel, 3000
MARKING INFORMATION
NOTE: XXXXX = Date Code, Trace Code and Vendor Code.
X X X X X
Vendor Code
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range, VDD, VHB - VHS ...................8V to 17V
HS Voltage, VHS ..................................................-1V to 105V
HB Voltage, VHB ..................................VHS + 8V to VHS + 17V
HB Voltage, VHB ..........................................VDD - 1V to 110V
HS Voltage Slew Rate........................................50V/ns (MAX)
Operating Junction Temperature Range ..... -40℃ to +140℃
Supply Voltage Range, VDD (1), VHB - VHS........... -0.3V to 20V
Input Voltages on LI and HI, VLI, VHI ................... -10V to 20V
LO Output Voltage, VLO ...........................-0.3V to VDD + 0.3V
HO Output Voltage, VHO...................VHS - 0.3V to VHB + 0.3V
HS Voltage, VHS
DC................................................................... -1V to 115V
Repetitive Pulse < 100ns ...................-(24V - VDD) to 115V
HB Voltage, VHB............................................... -0.3V to 120V
Package Thermal Resistance
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
SOIC-8, θJA ........................................................... 104.9℃/W
SOIC-8 (Exposed Pad), θJA .................................... 37.9℃/W
TDFN-4×4-8AL, θJA................................................. 32.6℃/W
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
HBM.............................................................................2000V
CDM ............................................................................1000V
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
NOTES:
1. All voltages are with reference to VSS. Positive and
negative currents are defined by flowing into and out of the
specified terminal respectively.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
DECEMBER 2023
2