SGM48510
11A High-Speed
Low-Side MOSFET Driver
GENERAL DESCRIPTION
FEATURES
The SGM48510 is a high-speed low-side gate driver for
MOSFET power switches. It provides large peak
source and sink current capability with capacitive loads.
● Input Voltage Range: 4.5V to 24V
● 11A Source and 6A Sink Peak Currents
● TTL and CMOS Compatible Logic Threshold
● Logic Levels Independent of Supply Voltage
● Fast Rise Time: 4ns (TYP)
The SGM48510 adopts separate output architecture.
The separate output architecture allows independent
control of the turn-on and turn-off speeds. An 8A peak
current at the Miller plateau region improves the
immunity of the device to the parasitic Miller conduction
effect during switching transitions of the MOSFETs.
● Fast Fall Time: 4ns (TYP)
● Fast Propagation Delays: 13ns (TYP)
● Separate Pull-Up and Pull-Down Outputs
● Dual Input Design (Choice of an Inverting (IN-) or
Non-Inverting (IN+) Driver Configuration)
● Available in Green TDFN-2×2-8AL and SOIC-8
Packages
The SGM48510 is available in Green TDFN-2×2-8AL
and SOIC-8 packages.
APPLICATIONS
Telecom Switch Mode Power Supplies
Power Factor Correction (PFC) Circuits
Solar Power Supplies
Motor Drives
High Frequency Line Drivers
Pulse Transformer Drivers
High Power Buffers
TYPICAL APPLICATION
VSOURCE
VDD
L1
SGM48510
D1
6
1
8
7
VDD
12V
VOUT
VDD
IN+
IN-
VDD
OUTH
OUTL
C1
Q1
R1
R2
5
4
VIN+
+
C2
GND
2, 3
Figure 1. Typical Application Circuit
SG Micro Corp
www.sg-micro.com
DECEMBER 2022 – REV. A