SG1526B/SG2526B/SG3526B
REGULATING PULSE WIDTH MODULATOR
FEATURES
DESCRIPTION
8V to 35V Operation
.
The SG1526B is a high-performance pulse width modulator
for switching power supplies which offers improved
functional and electrical characteristics over the industry-
standard SG1526. A direct pin-for-pin replacement for the
earlier device with all its features, it incorporates the
following enhancements: a bandgap reference circuit for
improved regulation and drift characteristics, improved
undervoltage lockout, lower temperature coefficients on
oscillator frequency and current-sense threshold, tighter
tolerance on softstart time, much faster SHUTDOWN
response, improved double-pulse supperession logic for
higher speed operation, and an improved output driver
design with low shoot-through current, and faster rise and
fall times. This versatile device can be used to implement
single-ended or push-pull switching regulators of either
polarity, both transformerless and transformer-coupled. The
SG1526B is specified for operation over the full military
ambient temperature range of -55°C to 150°C. The
SG2526B is characterized for the industrial range of -25°C
to 150°C, and the SG3526B is designed for the commercial
range of 0°C to 125°C.
5V Low drift 1% Bandgap Reference
1Hz to 500kHz Oscillator Range
Dual 100mA Source/Sink
Digital Current Limiting
.
.
.
.
. Double Pulse Suppression
.
.
.
Programmable Deadtime
Improved Undervoltage Lockout
Single Pulse Metering
. Programmable Soft-start
.
.
.
.
Wide current Limit Common Mode Range
TTL/CMOS Compatible Logic Ports
Symmetry Correction Capability
Guaranteed 6 Unit Synchronization
. Shoot-through Currents Less than 100mA
. Improved Shutdown Delay
Improved Rise and Fall Time
.
HIGH RELIABILITY FEATURES
Available To MIL-STD-883, ¶ 1.2.1
. Available to DSCC - Standard Microcircuit
.
Drawing (SMD)
MIL-M38510/12603BVA - SG1526BJ-JAN
.
. Radiation data available
.
MSC-AMS Level "S" Processing Available
BLOCK DIAGRAM
VREF
+VC
Reference
Regulator
Undervoltage
Lockout
+VIN
GROUND
To Internal
Circuitry
RD
RT
SYNC
Oscillator
OUTPUT A
CT
RESET
Soft
Start
CSOFTSTART
S
R
Q
Q
T
COMPENSATION
+VIN
Amp
Q
S
MEMORY
F/F
TOGGLE
F/F
Q
Q
+ ERROR
— ERROR
D
OUTPUT B
METERING
F/F
+ C.S.
— C.S.
SHUTDOWN
December 2014 Rev1.2
www.microsemi.com
© 2014 Microsemi Corporation
1