NOTES:
REVISION CP
SFM-1XX-XX-XXX-D-XXX
C
1.
REPRESENTS A CRITICAL DIMENSION.
C1
2. MINIMUM PUSHOUT FORCE: .5 LB.
No OF POSITIONS
ALL POSITIONS AVAILABLE
OPTIONS
3. COPLANARITY: .004[0.10] = POS 05 THRU 26
.006[0.15] = POS 27 THRU 50
(LEAVE BLANK FOR STANDARD
4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH
NOTCH GOING WITH ARROW.
-02 THRU -50
AND USE SFM-XX-D)
(USE BODY: SFM-XX-D-XX-X)
-N: NO POLARIZATION NOTCH
(USE SFM-XX-D-XX-N)
5. PINS CAN BE ORIENTED IN ANY DIRECTION;
BOTH ROWS MUST FACE SAME WAY.
DO NOT
SCALE FROM
THIS PRINT
-A: ALIGNMENT PIN (USE SFM-XX-D-A-X)
(SEE FIG. 4, SHT 2)
6. SEE NOTCH FOR PROPER ORIENTATION.
7. MAXIMUM PIN HEIGHT VARIATION: .003[0.08].
8. DUE TO HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
LEAD STYLE
-01: THROUGH HOLE
-LC: LOCKING CLIP (SEE FIG. 6, SHT. 3 & NOTE 8)
(AVAILABLE ON ALL LEADS)
(USE CONTACT: C-44-01-XXX)
(SEE FIG. 1, SHT. 1)
-P: PICK AND PLACE PAD
(SEE FIG. 5, SHT 2)
-02: SURFACE MOUNT
-TR: TAPE & REEL (SEE SHT 4)
(USE CONTACT: C-44-02-XXX)
(SEE FIG. 2, SHT. 2)
(NOT AVAILABLE WITH -SD OPTION)
-K: POLYIMIDE FILM PAD (.005[0.13]
THICKNESS WITH SILICONE ADHESIVE)
(SEE FIG. 3, SHT. 2) (USE K-500-300)
-SN: SOLDER NAIL FOR .062 BOARD
(SFM-XX-D-SN AND WT-27-01-T)
(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)
(NOT AVAILABLE WITH -A & -LC)
-SN2: SOLDER NAIL FOR .093 BOARD
(SFM-XX-D-SN AND WT-27-02-T)
(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)
(NOT AVAILABLE WITH -A & -LC)
**-SD: SCREW DOWN FOR .062 BOARD
(ONLY AVAILABLE WITH -01 & -02 LEAD STYLE)
(NOT AVAILABLE WITH OPTIONS -N, -A, -LC,
-RA, -SA, -WT, -RE1, -RE2, SN, OR SN2
(SFM-XX-D-SD, CPS-RR-XX-XX-X & ACCRT-01)
(SEE FIG. 8, SHT. 3)
-03: STRAIGHT MODIFIED
(USE CONTACT: C-44-03-XXX)
(SEE FIG. 1, SHT. 1)
*: DIMENSIONS N/A FOR -N OPTION
-L1: THROUGH HOLE (LOW INSERTION)
(USE CONTACT: C-61-01-XXX)
(SEE FIG. 1, SHT. 1)
*.145 3.68 REF
*.020 0.51 REF
-L2: SURFACE MOUNT (LOW INSERTION)
(USE CONTACT: C-61-02-XXX)
(SEE FIG. 2, SHT. 2)
-L3: STRAIGHT MODIFIED (LOW INSERTION)
(USE CONTACT: C-61-03-XXX)
(SEE FIG. 1, SHT. 1)
.120 3.05 REF
.050 1.27 REF
*.080 2.03 REF
02
-T1: THROUGH HOLE (PHOS BRONZE)
(USE CONTACT: C-119-01-XXX)
(SEE FIG. 1, SHT. 1)
C
-T2: SURFACE MOUNT (PHOS BRONZE)
(USE CONTACT: C-119-02-XXX)
(SEE FIG. 2, SHT. 2)
L
(** = NOT RELEASED FOR PRODUCTION)
01
C
L
BODY SPECIFICATION
-D: DOUBLE ROW
.050 1.27 REF
CP
PLATING SPECIFICATION
(NO. OF POS x .050[1.27]) + .015[0.38] REF
(NO. OF POS x .050[1.27]) + .155[3.94] REF
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
SFM-XX-D-XX-X
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
L
"A"
"A"
C-XX-01-XXX
(SEE NOTE 5)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.180 4.57 REF
.015 0.38 REF
.110 2.79 REF
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
(ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
"A"
C2
C
L
(SEE TABLE 1)
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
2
MAX SWAY (TYP)
"B" REF
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C4
.050 1.27
C3
.005 0.13 REF
(NO. OF POS x .050[1.27]) - .050[1.27] REF
1
MAX SWAY (TYP)
SECTION "A"-"A"
FIG 1
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THROUGH HOLE/STRAIGHT MODIFIED
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY
INSULATOR: LCP, COLOR: BLACK
CONTACT: TIGER EYE = BeCu
DWG. NO.
TIGER EYE LITE = PHOSPHOR BRONZE
SFM-1XX-XX-XXX-D-XXX
CP
BY:
JORDAN 12/11/89
SHEET 1 OF 4
F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
5秒后页面跳转
BSS123LT1资料解读：电气参数及替代型号推荐
LTC1151C双通道±15V零漂移运算放大器全面解读
CNX36手册解读：产品特性、应用及封装引脚详解
PS9552资料解读：引脚信息、电气参数
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
