868.35 MHz SAW Filter
•
•
•
•
Designed to Provide Front-end selectivity in 868.35 MHz
Low-Loss, Coupled-Resonator Quartz Design
Simple External Impedance Matching
SF868M35
Rugged, Hermetic, Low Profile TO-39 Package
Absolute Maximum Rating (Ta=25°C)
Parameter
CW RF Power Dissipation
Rating
+10
Unit
dBm
V
P
DC Voltage VDC Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
VDC
TA
Tstg
±30
-10 ~ +60
-40 ~ +85
°C
°C
Electronic Characteristics
Parameter
Sym
Minimum
Typical
868.35
3.5
Maximum
NS
Unit
Nominal Frequency (at 25°C)
(Center frequency between 3dB point)
Insertion Loss
fC
NS
MHz
-
5.5
dB
IL
3dB Passband
BW3
-
-
1.2
-
MHz
dB
Passband Ripple
-
∆α
±1.0
-
-
-
35
25
-
45
-
dB
at fC - 21.4 MHz (Image)
at fC - 10.7 MHz (LO)
Rejection
35
-
-
dB
60
dB
Ultimate
Operating Temperature Range
Turnover Temperature
-10
25
-
-
+60
55
-
TC
TO
fO
°C
°C
-
Temperature Stability
Frequency Aging
Turnover Frequency
fC
MHz
ppm/C2
Frequency Temperature Coefficient
Absolute Value during the First Year
-
0.032
-
FTC
|fA|
-
-
-
10
-
ppm/yr
-
DC Insulation Resistance Between any Two Pins
1.0
MΩ
NS = Not Specified
Notes:
1.
2.
The frequency fC is defined as the midpoint between the 3dB
frequencies.
5.
6.
Turnover temperature, T0, is the temperature of maximum (or
turnover) frequency, f0. The nominal frequency at any case
temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2].
Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, fC. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
7.
8.
All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
3.
4.
Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
Frequency aging is the change in fC with time and is specified at
+65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first
year after manufacture, decreasing in subsequent years.
9.
For questions on technology, prices and delivery please contact
our sales offices or email to sales@vanlong.com.
Phone: +86 10 6301 4184
Fax: +86 10 6301 9167
Email: sales@vanlong.com
Web: http://www.vanlong.com
SF868M35
© April 2004 by Vanlong Technology Co., Ltd.