Document 3ꢁ9-1
SMT Power Inductor - SER2000 Series
• Designed for high current power supply applications
• Flat wire windings provide exceptionally low DCR
• Isat ratings as high as 100 A
Designer’s Kit C374 contains ꢀ each of nine part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –ꢁ0°C to +85°C with Irms current, +85°C
to +1ꢀ5°C with derated current
Storage temperature Component: –ꢁ0°C to +1ꢀ5°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three ꢁ0 second reflows at
+ꢀ60°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C
/ 85% relative humidity)
Mean Time Between Failures (MTBF) ꢀ6,315,789 hours
PCB washing Only pure water or alcohol recommended
1
Recommended Land Pattern
0.ꢀ90
7,37
0.755 0.0ꢀ
19,18 0,51
ꢀ
3
0.160
ꢁ,06
3
Caution:
0.ꢀ10
5,33
Terminal 3 is provided for mounting stability
only. This terminal is connected to the
winding of the inductor and must not be
connected to ground or any circuitry.
0.365 0.0ꢀ
9,ꢀ7 0,51
0.736 0.03ꢁ
18,70 0,85
0.ꢁ70
11,9ꢁ
C
L
0.015
0,38
0.185
ꢁ,70
1
ꢀ
0.100 0.003
ꢀ,5ꢁ 0,76
0.311 0.015
7,90 0,38
0.150
3,81
0.150
3,81
typ
0.ꢀ60
Maximum
height
6,60
Weight
SERꢀ009
SERꢀ010
SERꢀ011
SERꢀ01ꢀ
SERꢀ013
SERꢀ01ꢁ
0.3ꢁ / 8,6ꢁ
0.37 / 9,ꢁ0
0.ꢁꢀ / 10,67
0.ꢁ7 / 11,9ꢁ
0.51 / 1ꢀ,95
0.55 / 13,97
6.65 – 6.89 g
7.ꢁ6 – 7.90 g
8.63 – 9.08 g
9.9ꢀ – 10.3 g
10.8 – 11.ꢁ g
11.7 – 1ꢀ.ꢁ g
Height
(See table)
0.00ꢁ/0,10ꢀ
0.130
3,30
*
inches
mm
0.1ꢀ5
3,18
0.515 0.015
13,08 0,37
0.100
ꢀ,5ꢁ
Dimensions are in
Width of flat area on winding
*
Packaging
SERꢀ009 ꢀ00 per 13″ reel; Plastic tape: ꢁꢁ mm wide, 0.ꢁ mm thick, ꢁ mm pocket spacing, 9.ꢀ5 pocket depth
SERꢀ010 ꢀ00 per 13″ reel; Plastic tape: ꢁꢁ mm wide, 0.ꢁ mm thick, ꢁ mm pocket spacing, 10.5 pocket depth
SERꢀ011 170 per 13″ reel; Plastic tape: ꢁꢁ mm wide, 0.ꢁ mm thick, ꢁ mm pocket spacing, 11.6 pocket depth
SERꢀ01ꢀ 150 per 13″ reel; Plastic tape: ꢁꢁ mm wide, 0.ꢁ mm thick, ꢁ mm pocket spacing, 13.0 pocket depth
SERꢀ013 150 per 13″ reel; Plastic tape: ꢁꢁ mm wide, 0.5 mm thick, ꢁ mm pocket spacing, 1ꢁ.0 pocket depth
SERꢀ01ꢁ 1ꢀ5 per 13″ reel; Plastic tape: ꢁꢁ mm wide, 0.5 mm thick, ꢁ mm pocket spacing, 15.0 pocket depth
Specifications subject to change without notice.
Please check our website for latest information. Document 3ꢁ9-1 Revised 01/ꢀ1/08
© Coilcraft, Inc. 2007