SED1601
CMOS DOT MATRIX HIGH DUTY LCD DRIVER
80-bit High Voltage Resistant Output
1/100 to 1/300 in Display Duty
CMOS High Voltage Resistant Process
•
•
•
■ DESCRIPTION
The SED1601 is an 80-output dot matrix LCD segment (column) driver for driving a high-capacity LCD panel
at duty cycles higher than 1/100 (up to 1/300). The LSI has a wide range of the LCD driving voltages. Due
to the architecture of the SED1601, the LCD driving voltage, V0, is isolated from VDD supply. This provides
the ability to adjust the offset bias independently of VDD. These unique features allow the SED1601 to
interface with a variety of LCD panels. The SED1601 does not require a controller to output an enable signal
to implement daisy chain technology. This provides for easy interfacing with LCD controllers such as the
SED1330, SED1351, SED1335 or the SED1341.
The SED1601 is used in conjunction with the SED1610 (86 row driver) or the SED1630 (68-bit row driver)
and SED1631 (100 row driver) or the SED1632 (86-bit row driver), SED1633 (100-bit row driver) and
SED1634 (100-bit row driver) to drive a large-capacity dot matrix LCD panel.
■ FEATURES
Low-power CMOS technology
Daisy chain enable support
•
•
•
•
•
•
•
•
•
•
•
•
80-bit segment (column) driver
No enable signal by controller is required
Wide range of LCD voltage .... –12V to –28V
Supply voltage ........................ 5.0V ± 10%
High-speed 8-bit bus
Duty cycle ............................... 1/100 to 1/300
Output shift direction pin selectable
Shift clock frequency .............. 6.5MHz max
Package....... QFP5-100 pin (FAA)
DIE: Al pad chip (DAA)
Ability to adjust offset bias of the LCD source from
VDD
■ SYSTEM BLOCK DIAGRAM
D0 ~ D7
XSCL
LP, FR
LCD
CONTR
YSCL
YD
SED1601
80
SED1601
80
SED1601
80
SED1601
80
SED1630 68 COM
320 SEG × 136 COM
DUTY: 1/136
68 COM
SED1630
479