PF776-03
SED1526/28 Series
SED1526/28 Series
Dot Matrix LCD Controller Driver
SSC5000Series
●Ultra Low Power Consumption
●Built-in Power Supply Circuit for LCD
●97 Driver Outputs
■ DESCRIPTION
The SED1526 series is a single-chip LCD driver for dot-matrix liquid crystal displays (LCD’s). It accepts serial or
8-bit parallel display data directly from a microprocessor and stores data in an on-chip display RAM. It can
generate an LCD drive signal independent from microprocessor clock.
As the SED1526 series features the very low power dissipation and wide operating voltage range, it can easily
realize a powerful but compact display unit having a small battery.
A single chip of SED1526 series can drive a 17×80-pixel or 33×64-pixel LCD panel.
(Note:The SED1526 series are not designed to have EMI resistance.)
■ FEATURES
● Direct data display using the display RAM. When RAM data bit is 0, it is not displayed; when 1, it is displayed.
● Large 80×33-bit RAM capacity
● On-chip LCD driver circuit (97 segment and common drivers)
● High-speed, 8-bit microprocessor interface allowing direct connection to both the 8080 and 6800
● Supported serial interface
● Rich command functions (upward compatible to SED1520 Series); they are Read/Write Display Data, Display
On/Off Switching, Set Page Address, Set Initial Display Line, Set Column Address, Read Status, Static Drive
On/Off Switching, Select Duty, Duty+1, Read-Modify-Write, Select Segment Driver Direction, Power Save,
Reset, Set Power Control, Set Electronic Controls, Clock Stop.
● On-chip CR oscillation circuit (OSC)
● On-chip LCD power circuit (The internal and external LCD power supplies are software selectable.)
● Very low power consumption
● Flexible power voltages; 2.4 to 6.0 V (for logic) and -13.0 to -4.0V(VDD-V5)
● –40 to +85°C wide operating temperature range
● CMOS process
● Package: QFP5-128pin (plastic), Die form (Al pad, Au bump)
■ LINE UP (Series specifications: ex. 128-pin flat package)
Operating clock
(Internal OSC)
Segment
driver
Common
driver
VREG
type
CMOS
pin positions
Model
Duty
SED1526F0A
SED1526FAA
SED1526FEA
SED1528F0A
20 KHz
20 KHz
20 KHz
20 KHz
1/8, 1/9, 1/16, 1/17
1/8, 1/9, 1/16, 1/17
1/8, 1/9, 1/16, 1/17
1/32, 1/33
80
80
80
64
17
17
17
33
Tpye 1
Tpye 1
Tpye 2
Type 1
Type A
Type B
Type A
Type A
Type 1 VREG (Built-in power supply regulating voltage)
Temperature gradient: 0.17%/°C
Type 2 VREG (Built-in power supply regulating voltage)
Temperature gradient: 0.00%/°C
Refer to No. P3 (Package pin layout), No. P4 (PAD layout) and No. P5 (PAD coordinates).
An SED1526 series package has one of following subcodes according to its package type (an example of SED1526):
SED1526F0A: QFP5-128pin flat package
SED1526D0 : Bear chip
*
SED1526D0A having aluminium pad
SED1526D0B having gold bump
SED1526T**: TCP
1