600W Single Output Power Supply
SE-600 series
Features :
AC input active surge current limiting
AC input range selected by switch
Protections:Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
High power density 4.9w/inch3
Built-in remote sense function
UL approved
Low cost
2 years warranty
SPECIFICATION
MODEL
SE-600-5
SE-600-12
SE-600-15
SE-600-24
SE-600-27
SE-600-36
SE-600-48
DC VOLTAGE
5V
12V
15V
24V
27V
36V
48V
RATED CURRENT
CURRENT RANGE
RATED POWER
100A
0 ~ 100A
500W
50A
40A
25A
22.2A
16.6A
12.5A
0 ~ 50A
600W
0 ~ 40A
600W
0 ~ 25A
600W
0 ~ 22.2A
599.4W
150mVp-p
24 ~ 30V
1.0%
0 ~ 16.6A
597.6W
200mVp-p
32 ~ 40V
1.0%
0 ~ 12.5A
600W
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3 2.0%
150mVp-p
10 ~ 13.5V
1.0%
150mVp-p
13.5 ~ 16.5V
1.0%
150mVp-p
22 ~ 26.4V
1.0%
200mVp-p
43 ~ 56V
1.0%
OUTPUT
4.75 ~ 5.5V
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
0.5%
2.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1000ms, 50ms/230VAC
1000ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
20ms/230VAC 16ms/115VAC at full load
90 ~ 132VAC / 180 ~ 264VAC selected by switch
47 ~ 63Hz
254 ~ 370VDC
87%
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
78%
83%
84%
87%
87%
88%
INPUT
12A/115VAC
30A/115VAC
<2.0mA / 240VAC
7.5A/230VAC
60A/230VAC
105 ~ 125% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
5.75 ~ 6.3V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
85 (TSW1) detect on heatsink of power transistor
OVERLOAD
31 ~ 36.5V
42 ~ 50V
57.6 ~ 67.2V
PROTECTION
OVER VOLTAGE
5
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +60 (Refer to "Derating Curve")
WORKING TEMP.
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
-40 ~ +85 , 10 ~ 95% RH
ENVIRONMENT
0.05%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1 approved
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
MTBF
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
SAFETY
197K hrs min. MIL-HDBK-217F (25
247*127*63.5mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
2.1Kg; 6pcs/13.4Kg/1.03CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
File Name:SE-600-SPEC 2011-08-23