Low Voltage Precision
Adjustable Shunt Regulator
TLV431, NCV431, SCV431
The TLV431A, B and C series are precision low voltage shunt
regulators that are programmable over a wide voltage range of 1.24 V to
16 V. The TLV431A series features a guaranteed reference accuracy of
1.0% at 25°C and 2.0% over the entire industrial temperature range of
−40°C to 85°C. The TLV431B series features higher reference accuracy
of 0.5% and 1.0% respectively. For the TLV431C series, the accuracy
is even higher. It is 0.2% and 1.0% respectively. These devices exhibit
a sharp low current turn−on characteristic with a low dynamic impedance
of 0.20 W over an operating current range of 100 mA to 20 mA. This
combination of features makes this series an excellent replacement for
zener diodes in numerous applications circuits that require a precise
reference voltage. When combined with an optocoupler, the
TLV431A/B/C can be used as an error amplifier for controlling the
feedback loop in isolated low output voltage (3.0 V to 3.3 V) switching
power supplies. These devices are available in economical TO−92−3 and
micro size TSOP−5 and SOT−23−3 packages.
www.onsemi.com
Pin 1. Reference
2. Anode
1
3. Cathode
1
2
2
3
3
STRAIGHT LEAD
BULK PACK
BENT LEAD
TAPE & REEL
AMMO PACK
TO−92
TO−92
LP SUFFIX
CASE 29−11
LPRA, LPRE, LPRM,
LPRP SUFFIX
CASE 29−11
Features
• Programmable Output Voltage Range of 1.24 V to 16 V
• Voltage Reference Tolerance 1.0% for A Series, 0.5% for B Series
4
and 0.2% for C Series
Pin 1. NC
2. NC
TSOP−5
SN SUFFIX
CASE 483
5
• Sharp Low Current Turn−On Characteristic
• Low Dynamic Output Impedance of 0.20 W from 100 mA to 20 mA
• Wide Operating Current Range of 50 mA to 20 mA
• Micro Miniature TSOP−5, SOT−23−3 and TO−92−3 Packages
• NCV and SCV Prefix for Automotive and Other Applications
Requiring Unique Site and Control Change Requirements;
AEC−Q100 Qualified and PPAP Capable
3
3. Cathode
4. Reference
5. Anode
2
3
1
SOT−23
SN1 SUFFIX
CASE 318
Pin 1. Reference
2. Cathode
1
3. Anode
2
• These are Pb−Free and Halide−Free Devices
Applications
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
• Low Output Voltage (3.0 V to 3.3 V) Switching Power Supply
Error Amplifier
• Adjustable Voltage or Current Linear and Switching Power Supplies
• Voltage Monitoring
DEVICE MARKING INFORMATION
AND PIN CONNECTIONS
See general marking information in the device marking
section on page 13 of this data sheet.
• Current Source and Sink Circuits
• Analog and Digital Circuits Requiring Precision References
• Low Voltage Zener Diode Replacements
Cathode (K)
Reference (R)
+
-
1.24 V
ref
Anode (A)
Figure 1. Representative Block Diagram
© Semiconductor Components Industries, LLC, 2000
1
Publication Order Number:
January, 2020 − Rev. 26
TLV431A/D