SCR2-17-XX-X-XX.XX-XX-XX
REVISION V
POSITIONS
-32
END 2 OPTION
-S1: SOCKET BODY PLASTIC LATCH
-S2: SOCKET BODY METAL LATCH
-BC: BLUNT CUT
PLATING
-S: SELECTIVE GOLD
-F: FLASH SELECTIVE GOLD
END 1 OPTION
-S: SOCKET
-T: TERMINAL
V
-D: DOUBLE ENDED
-BC: BLUNT CUT
-DK: DOUBLE ENDED
**
CABLE LENGTH*
****
****
-XX.XX (IN METERS)
00.25[9.84] MIN - 01.00[25.40] MAX
KEYED POLARIZATION
-MK: DOUBLE ENDED KEYED
METAL LATCH
****
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
* -00.25, -00.50, AND -01.00 ARE CATALOG STANDARD
LENGTHS. FOR OTHER LENGTHS CONTACT SAMTEC.
FIG. 1
** -D OPTION, DO NOT DESIGN IN. SAMTEC WILL ONLY
SCR2-17-32-X-XX.XX-S-S1 SHOWN
SUPPORT EXISTING BUSINESS AS OF REV D
**** AVAILABLE TO EXISTING CUSTOMERS
ONLY; -DK IS SAME AS -S-S1. -BC IS
SAME AS -S-BC. -MK IS SAME AS -S-S2.
THESE END 1 OPTIONS CANNOT BE
COMBINED WITH END2 OPTIONS
C2-B-GR
ASSEMBLED LENGTH: XX.XX + "B"
(SEE TABLE 1)
CABLE LENGTH: XX.XX ±2%
100±10 3.9±.4
11.53 .454
REF
CWP-1
(CENTERED ON CABLE ±30[1.2])
LABEL-ET
12.83 .505 REF
DO NOT
SCALE FROM
THIS PRINT
30.00 1.181 REF
23.45 .923
REF
42.04 1.655
REF
NOTES:
CXX-XX-XX
1.
REPRESENTS A CRITICAL DIMENSION.
2. NOTE MOVED.
3. NOTE DELETED.
4. NOTE DELETED.
5. WIRING TO BE POS 1 TO POS 1, POS 2 TO POS 2, POS 3 TO POS 3, ETC.
C1-D-ET
6. ASSEMBLY TO BE 100% HI-POT TESTED AT 1000V DC AND ASSEMBLY TO BE 100% TESTED FOR
OPENS AND SHORTS; AFTER IN-PROCESS 4 FOR -D AND IN-PROCESS 3 FOR -BC, THEN FINAL ASSEMBLY.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
7. PANEL THICKNESS: 0.08[.03] - 5.2[.205].
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
TOLERANCES ARE:
PROPRIETARY NOTE
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
8. ASSEMBLY, INCLUDING SUB-SCRX-17-XX, TO BE SHIPPED IN SEAL-TOP BAGS,
SEE FIG. 3, SHEET 2.
DECIMALS
ANGLES
2
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XX: 0.13 [.005]
9. MINIMUM RETENTION FORCE: 11N[2 LBS].
PHONE: 812-944-6733
FAX: 812-948-5047
.XXX: 0.051 [.0020]
e-Mail: info@SAMTEC.com
code: 55322
10. TORQUE SPECIFICATION FOR NUT ON SUB-SCRX-17-XX IS 12 IN-LB.
11. NOTE DELETED.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1.33333
MATERIAL:
DESCRIPTION:
12. NOTE DELETED.
SUB-SCR2-17-32-01: PBT
IPD1-16-D-K: PBT
CONTACTS: PHOS BRONZE
SPN-17-02: PA66
UNSEALED CIRCULAR 24 AWG CABLE ASSEMBLY
DWG. NO.
13. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, AND TOOLING.
14. FOR LENGTHS GREATER THAN 3.00 METERS, CONTACT SAMTEC FOR ELECTRICAL TEST DATA.
15. NOTE DELETED.
SCR2-17-XX-X-XX.XX-XX-XX
BY:
BRATCHER 09/28/2005 SHEET 1 OF 3
F:\DWG\MISC\MKTG\SCR2-17-XX-X-XX.XX-XX-XX-MKT.SLDDRW