SC-E-100 Series
Analogue I/O to Comms Gateway
MODBUS TCP or RTU Protocol
Ethernet or RS232/485 Comms Port
Universal Configurable Analogue Input
IsoSlice I/O system for additional I/O
Built in web-page for live monitoring of data
Inputs
DC Current & Voltage
0-20mA, 4-20mA, 0-10mA into 15/30Ω
0-1V, 0-10V, 1-5V into 100kΩ / 1MΩ
0-25mV, 0-10mV, 0-500mV into >100MΩ
Min & Max Full Scale Ranges are:
DC Current
0 - 1mA
0 - 5A
10mA
Bipolar DC Current
5mA
DC Voltage
Bipolar DC Voltage
2 Wire Pot
0 - 25mV 0 - 300V*
5V
10V
0 - 1kΩ
0 - 125Ω
0 - 1kΩ
3 Wire Pot
0 - 100kΩ
The SC-E-100 Ethernet Gateway module
provides a straight forward method of
interfacing analogue and digital process
parameters to an Ethernet or RS232/485
network. The SC-E-100 allows the user to
view the status of the individual inputs via
the front panel display.
The SC-E-100 unit can have one or two
analogue inputs but the system can be
expanded through the use of the optional
SC-ISOSLICE slice I/O modules.
* Note: For input voltages greater than 60Vdc a Divider unit must be specified.
Thermocouples
Types E,J,K,N,R,S,T,B linearised or non-linearised. Ranges: Wide range of inputs. Cold junction compensation
(can be turned off). Upscale or downscale t/c burnout options
Resistance Thermometers
2, 3 or 4 wire PT100 or PT1000, linearised or non-linearised. Ranges: Wide range of inputs.
Upscale or downscale RTD burnout options.
Additional I/O
Extra analogue and digital inputs and outputs are available through the SC-ISOSLICE I/O modules.
Technical Specifications
These modules connect automatically via
the DIN rail mounted bus connector,
allowing the easy addition and removal of
extra I/O.
A built-in display allows local monitoring of
the individual inputs and outputs, a useful
commissioning and operations tool.
Additionally the Ethernet version has a
built-in web page which can be used to
display live data using any standard web
browser.
Using the SC-E-100 is a simple way to
implement an Ethernet measurement and
control system or it can be used to add
additional inputs and outputs to an existing
Ethernet or RS232/485 installation.
Parameter
Supply Voltage
Min
16V
Typ
24V
Max
30V
120
Comments
Supply Current (mA) 65
Volt Drop (mA input)
Input Impedance (Volt)
Input Impedance (mA)
Output Linearity Error
Temp Coefficient
24Vdc supply
0.3
1MΩ
15Ω
0.01ꢀ
At 20mA Input
0.05ꢀ
100ppm/ꢁC
55ꢁC
Operating Ambient
Relative Humidity
0ꢁC
0ꢀ
90ꢀ
Isolation Voltage see note 1kV
Surge Voltage
2.5kV for 50µS
Transient of 10kV/µS
Notes
The process input level is shown on thew 4 digit LED display
Figures based on 24Vdc supply an ambient temperature of 20ꢁC.
Connection Details
Installation Data
Mounting
Orientation
Connections
Conductor Size
1. Power Input -ve
2. Power Input +ve
DIN Rail Ts35
Any
Screw Clamp with pressure plate
0.5-4.0mm
3. Tx supply +ve RTD 4th wire
6. RTD 3rd wire
5. Input mA +ve, T/C +ve, RTD +ve
4. Input mA -ve, T/C -ve, RTD -ve
Insulation Stripping 12mm
Weight
Approx 120g
Ordering Information
Cynergy3 Components Ltd.
7 Cobham Road
Part No.s:
Comms
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
SC-E-100-RS232 RS232
SC-E-100-RS485 RS485
SC-E-100-E
Ethernet
ISO9001CERTIFIED
Made in the UK
www.cynergy3.com
SC-E-100 2017
© 2017 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.